I received an email with the following access: Enter your lab's private VPN connection information: Lab Network Address: -1 Username: xxxxxx Password: yyyyyy I am using the Cisco AnyConect Mobility Client, but in the email I have not received the IP ...
Forum Posts
Hi Dear Community,Just wanted to share my experience with Python and Netbox Api to add automatically to my Netbox inventory on one hand a Cisco device running IOS-XE and on the other hand a Juniper SRX device running Junos.We generate two kinds of p...
Hello,PyATS fails to connect to my device when device hostname = U250-s2-132-csdwanWhen I changed the device hostname to ciscosdwan132, it workedDevice version: Cisco IOS XE Software, Version 17.09.03apyats version ==23.8I verified my yaml file and i...
How do I send a command to the junos shell with pyatsjunos>start shelljunos#cd /var/public-----------------------------------------juniper_device = testbed.devices['ptr513-u210']juniper_device.connect()juniper_device.execute('cd /var/public') <--- th...
Greetings, I was able to find the Cisco-IOS-XR-ping-act model to automate the Ping actions. But is there anything similar for the XE platforms? I cannot find any. And if none exists, what is a common solution to that - to automate ping action on XE...
What I wish someone would have told me about installing YANG Suite This was on a MacBook Pro, done today April 25, 2022 Install Docker Desktop on your PC, start it and keep it running when you want to use YANG SuiteFigure out where you want to insta...
There is an error when trying to get config in part 4 step 1 b, the code is not good as of at least 31.12.2023.(ios-xe version 16.9)this is the code to get the output from the lab:from ncclient import managernetconf_filter = """ ...
Hi, community! I have an error <bad-element>filter</bad-element> in the netconf response in IOS XE 17.3.1 on CSR Latest Code Always On DevNet Sandbox but the same code works fine in IOS XE 16.9.4 on CSR. I found discussions with the same problem (lin...
Hi mates,I am trying to test OpenConfig/NetConf with YANG Development Kit on my local test bed. The IOS-XRv 6.1.2 nodes along with Ubuntu Servers are mounted on vSphere host and the proper connectivity. I followed the steps to install YDK-Gen along w...
In Cisco API Console i found .- CEEM API- Cisco Carlsbad IT QA- Cisco On Demand CHIDS API- Cisco PSIRT openVuln API- Corona API- Datafoundation-POE- Hello API- HelloCommerce API- Workforce Mohit But the EoX API was not found for both users.Can you pl...
My Cisco device is not directly accessible from the system where I am running the yangsuite, so I usually use an intermediate jump host to reach the device. I can connect to the Cisco device from the shell using the port forwarding as belowssh -L 830...
Hi,I have a netconf-enabled device that I am having problems connecting to in yangsuite. The device is IPv6-only, and requires an SSH identity file to connect to the netconf listener on 830. I do not have the password for the device.I can ping the ...
Hi Guys I am pushing the following config to the cisco routers, thera re about 500 of them, but script is getting failed/---- name: Create ACLhosts: routersgather_facts: falseconnection: localvars:cli:username: "{{ hdn_user_rw }}"password: "{{ hdn_pa...
Hi Experts.Im trying to use YDK-GEN to convert JSON "config" into NetConf XML format to send to my router and switches. My plan is to use a combination of "code" and some jinja2 templating depending on the complexity of the config (and how standardiz...
Hello, How do I handle these connection issues in PyATS?(.venv) [an144a@DEVAUTOS02 tests]$ python3 Python 3.9.16 (main, Sep 12 2023, 00:00:00) [GCC 11.3.1 20221121 (Red Hat 11.3.1-4)] on linux Type "help", "copyright", "credits" or "license" for mor...
