My UCS C460 installed wtih ESXi 6.0.0 Build 13635687(VMware-ESXi-6.0.0-9313334-Custom-Cisco-126.96.36.199.iso) is running some Linux and windows servers.After half years stable running,I began to get some PSOD with GP Exception 13.At the very start,it happened every 2 weeks.Then it happened more and more frequently, the server will need to restart every 2 days.
Each time,I will get a GP Exception 13 but the following message is different.I have replaced the mother board and memory card,nothing changed.So I believe it should not be a hardware issue.
I collect some error message but I can not locate the root cause.
My UCS C460M4's BIOS version is C460M188.8.131.52b.0.062120160920,I have tried other version before.
In this article, we are providing sample work flows for the private cloud management solution. In our topology, ACI is used for network. We have placed the BMA outside the UCS fabric and connected through L3 switch. The UCS ser...
This workflow will log onto a WLC and find the connected AP(s) and test if they are on the network.
Validated on UCSD 184.108.40.206
This came together via several parties of people (Sasha, Russ and Michael Z.)
The original question was this:
When deploying open automation connector module and trying to create side menu per UCSD docs
This contribution was provided by: Sabina Al Farah.
Many thanks go out to Sabina Al Farah.
2 Workflows are attached :
Ceph - Setup Cluster - using Ansible - on RHEL
Ceph - Provision Block Storage
This is an integration example between UCSD and Cohesity.
Posted for Russ (Please direct questions to: email@example.com)
Please watch video for more details: