05-23-2008 03:56 AM - edited 03-18-2019 08:59 PM
In my office i have one CCM 5.3
Now i want add second CCM 5.3 for voice mail
When i run installation from CD all install is normal, but after setup ask me about "SI you server fist node in the cluster" i set "NO"
set my first CCM ip and sequrity pass, but it doesnt work :( maybe pass wrong? Where i must change sequrity passwd?
05-25-2008 05:46 AM
Hi
You can set the security password from the console or SSH to the existing CallManager.
Use this command:
set password security
It will then prompt you for the old/new passwords.
Regards
Aaron
Please rate helpful posts...
05-25-2008 01:22 PM
have you added the SUB into the PUB config before installing the new server?
HTH
javalenc
if this helps, please rate
05-26-2008 04:15 AM
Hm... what is SUB and what is PUB? O_o
05-26-2008 08:03 AM
PUBlisher, SUBscriber
HTH
javalenc
if this helps, please rate
05-26-2008 08:37 AM
Please - tell me - how i can do it?
05-26-2008 08:52 AM
you can refer to the administration guide
System Administration and Features and Services
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/sys_ad/index.htm
the information is there, also i'd recommend you going thru the whole guide to get used to the terms
HTH
javalenc
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide