We have a customer that would like to integrate their Azure AD Services as both the LDAP Directory and Authentication source. Although I think this might be possible, I can't find any documentation to back me up... except a document on how to do it...
Forum Posts
We have a query in configuring SNMPv3 in CUCM 12.5 Under Authentication Required Field If FIPS mode or Enhanced Security Mode is enabled, choose SHA as the protocol.( Do we have a provision to change the protocol to SHA2 by installing any cop file ...
Hello,We are planning to move from a third party PBX to Cisco. We have few fax machines and few analog phones. Can I use a VG350 Analog voice gateway with FXS ports to configure all the above devices?
how can make communication H323 between cisco iphone registred in gatekeeper and avaya iphone registred on avaya server. - i have gatekeeper for each Zone and one when in HQ called gatekeeper-Central when all Zone-gatekeeper registerd with H323 - i a...
Dear Team, There is a specific IVR number (non-toll free) when we dial out, after the call connects and we could hear the IVR message/recording but after that the call is going on hold in each caller input press event. All other IVR number works fine...
I have logged into RTMT via CUCM credentials.Can you add IM&P and CUC to the System Tabs shown here in Alert Central to be able to configure and monitor?
Hello, I am trying to register a new VG450 to CUCM as a SIP Gateway. This is working as expected, but I also need to be able to register the same VG450 as SCCP and MGCP. MGCP is fine, since it uses hostname.domain, SCCP is NOT working as it uses the ...
Hi... Wanna ask 2 questions.1) What types of Routers and VGs can be configured for CME?And its compatibility with various types of IP Phones? 2) Is it possible to configure CME in Router/VG without CME License?If possible, what type? Thanks in advan...
Folks Quick one - we had a hardware problem and had to rebuild publisher and restore a backup.That all went grand - surprised to see all the certs restored great. HOWEVERA LOT of user Pins and passwords (for local users) got reset / invalidated. Is...
When I use AXL getPhone and look at the VendorConfig section the values don't make much sense in terms of: 1. I was unable to map 0/1 to enable/disabled in the UI. It's inconsistent - (referring to the screenshot attached) For example:PC Port GUI - E...
Hello trusted Cisco community. Has anyone out there ever performed a consolidation of 2 unity clusters, where you migrated mailboxes from a cluster within one region of the globe, over to another, whilst maintaining integration with 2 separate CUCM ...
What happened to the CUCM Install and Upgrade documentation page at https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/series.html#InstallandUpgrade ? Why did all Install and Upgrade guides for CUC...
Hi fellas,I'm facing an issue with our CUCM regarding the triggered alerts. Within RTMT I see three alerts on a regular basis1. LogPartitionHighWatermarkExeeded2. LogPartitionLowWatermarkExeeded3. SyslogSeverityMatchFoundI can live with the first two...
Resolved! Getting Error while inserting Users-CUCM
Hy I tried to upload some users and telephone number through bulk administration tool ,in that time i am getting error which i have attached .So please help me on it .
Hello all, I have a cuc version 10.5 ,i have a problem this error showed in the system:Cisco Unity Connection cannot accept new messages, and you may not be able to upgrade Connection. The location where messages are stored has reached the maximum ca...
