Hi All I have a customer which has UCS b200 M2 and has 5 blade install i will use one blade to install the following :1- PUB CUCM 8.62- PUB CUC.3- cisco unified presence.all the above will be install in one blade and the other SUB...
Hi All I have a customer which has UCS b200 M2 and has 5 blade install i will use one blade to install the following :1- PUB CUCM 8.62- PUB CUC.3- cisco unified presence.all the above will be install in one blade and the other SUB...
I am working on a redundant Unified solution based on CUCM BE6000, we are using CMBE6K-UWL bundle which includes its server, but when we need to choose for redundant server , all documentation we have read recommends UCS-C200M2-VCD2 server as option....
Just installed Unity Connection and we are doing some testing before cutover. One of the first items is to get the Helpdesk on board. I see the roles for Helpdesk administrator and this fits the bill perfectly. We've set up a user called helpdesk and...
Hello,After 2 hours my Unity show me this folow error. Anybody see this error?06_load-database|Depending on the server specifications and on the level of activity on the system, this may take up to an hour.|<LVL::Info>
Hi EveryoneI have a site in NYC that has 3 companies all in one building and each company has there own front desk number. Each number is being forwarded to our main number and 1 of the 3 companies is having a problem with calls being placed on hold....
Hi,I have an MGCP Gateway and a Right Fax Solution along with CUCM. Was wondering if FAX detection application can be configured for this setup or is FAX detection only for H323 gateways.ThanksPrakash
Hello Team This is the topology with my client:Reported from the remote site where the Agents and IP Communicators that to make calls to the PSTN are presenting a delay of a few seconds to release the call.I did a ping from the CUCM to the voice ...
Hi everybody,please i need the 8.5 version of the below BoMPart NumberQtyCCX-80-NEW-LIC1CCX-80-N-PSS-LIC1CCX-80-N-P-LIC10CCX-80-P-PAK1CCX-80-MEDIA-KIT=1brsam
I know this topic has been beat to death but we have a Nortel PBX and are in the process of transitioning from Nortel Call Pilot voicemail to CUC 8.6, keeping most of the users on Nortel phones and about 5% on Cisco phones connected to CUCM 8.6.Quest...
Hi everybody, please i need the 8.5 version of the below BoM please.. <TR style="HEIGHT: 15pt" mcestyle="height: 15pt;"><TD style="WIDTH: 84pt; HEIGHT: 15pt" height=20 width=112 mcestyle="width: 84pt; height: 15pt;">Part Number</TD...
HiI have created a script in Unity Express . one of the option is redirecting the call to one international number .but when user press the option it says number is incorrect .Can some one pls suggest what could be the issue.> when dialing the same n...