We have an environment that has 1 pub, 1 sub, 1 IM&P node, 1 connection node and a UCCX node. They are currently running version 10.X respectively. New hardware has been purchased and I worked with TAC for over a month getting the cluster (CUCM and...
Forum Posts
Hi Experts, would like to check if there is way to generate traffic report from Cube Media Proxy. Trying to look for concurrent SIP sessions towards Voice Recorder. Thanks
Dears,We have three UCS servers will be end of support next year (30 June 2023) . Those servers are hosting all IP Telephony applications.we are looking for your support to propose the best approach for replacement with minimum impact and simple migr...
CUCM 11.5.1.15900-18VMware ESXi, 6.0.0, 3073146 Due to CPU spikes, we would like to move from the original OVA of 2500 users to 10K users. We have a maintenance window and I want to verify this is the correct procedure: Gracefully turn off the CUCM ...
Pls. help just switched versions cucm 12.5 to 14 tried to run ciscocm.postUpgradeCheck-00032.cop.sha512 and got this message: Error encountered: The selected file is not valid. Please ensure that the COP/ISO file is intended for this release. MD5 Has...
Followed the (quite horrible) upgrade documentation to the letter, but upgraded system will not function. Cannot figure out why. HA Replication is working fine. But no matter what I have tried, the system will not come up and register with CUCM. ...
Hi, I'm reviewing this cluster, which has three nodes all CUCM and no IM&P. One TVS certificate needs to be renewed which is fine. However looking for expired certificates there are quite a few old "trust" certificates with no apparent matching cert...
Resolved! Upgrade path for 2921 voice routers
Currently operating voice network on (3) 2921 routers.Current inventory on 1 of the routers:X-2921-DC-VG#sh inventoryNAME: "CISCO2921/K9", DESCR: "CISCO2921/K9 chassis, Hw Serial#: FTXxxxxxxx, Hw Revision: 1.0"PID: CISCO2921/K9 , VID: V07 , SN: FTXxx...
Resolved! SIP Gateway & ISDN PRI Configuration
I am trying to clear up some confusion on my understanding of SIP voice gateways. I have a 2900 series router at a customer site that is currently configured for MGCP with a T1 PRI.The MGCP and T1 are functional. Is it possible to utilize a SIP trunk...
CUC Unity 12.5 2 servers Pub and SubThis service is not starting and RTMT keeps sending alerts about it - Connection Digital Networking Replication Agent -I have tried to start the service in Connection Serviceability and I am unsuccessful .Does...
Tengo un viejo cisco 2801 y quiero usarlo con teléfonos 8945 o 7821, pero al agregarlo con ephone-type, despues en voice register global no me reconoce el load.Existe alguna posibilidad de configurar estos teléfonos a este router cme.
I am unable to determine why my configuration doesn't work. CUBE configuration attached. Interesting dial-peers are 134, 13401 and 13402. And "voice class e164-pattern-map 134" Outbound call are met with this error: 1148: Jul 28 07:46:52.049: //27764...
Hi,I need help about Enable SAML SSO options on CUC. Currently, that option is grayed out and I can't click it to Enable SAML SSO. It happens in CUC 11.5(SU11). Even after I export all metadata, it's still grayed out. What I have done in CUC is:- Mak...
Hi AllNearly 500 users who are LDAP Synced in CUCM , but do not appear in a Unity LDAP Sync filter. What is broken for them if they are not synced on Unity.
Hi Everyone,I have 1 publisher and 1 subscriber System version: 11.5.1.18900-97We have started moving all of our sites/locations to Meraki SDWAN. It seems that immediately after that, we started having ext to ext dialing, one-way audio, straight to v...
