Unified Communications Infrastructure

Welcome to those of you who are joining the Cisco and Verizon SIP Trunking Designs that Enhance Business Agility technical deep-dive webcast. Products experts from Cisco and Verizon will share important technical design and architecture consideration...

Any help on how to setup the following scenario CUCM---H323gateway(3925)---H323gateway (Vg204)The problem in configuration on the 3925 to act as H323 to server CUCM and server Vg204 at the same time .Thanks

Hi allI have an AA script that prompts a user to press 1 to leave a message or press 2 to be transferred to a mobile number. This mobile number changes most days at no particular interval. My idea is (if caller presses 2), to transfer calls to recept...

Hi, has anyone experience with the monitoring of a ccx system withX nagios and can help me, how can I set up a monitoring of the most important services. Thank you Ben

Hi all,I just installed Meeting place Webex node , an i want what exactly the URL link to access to this server.Thanks in advanceHicham

Hi All,i am very new to voice and we are migrating from cisco ip phoen to mitel phones.So at the moment voice gateway router is having cisco unity express installed in it.My question is that if i shut down service engine interface then servcie engine...

While preforming a test in a Presence 7.0  installation i cant seem to send a broadcast message from theAdministration page underApplication-Phone Messengerevery time i select the users and send a broadcast it failsFailed to broadcast message to sele...

We have a CUCM 8.6 configured with a SIP trunk to a Mitel.Calls from Mitel to CUCM and vice versa are ok.The problem is when a Mitel user call the meet-me number hosted in CUCM, CUCM can hear clearly the users in Mitel but Mitel can’t hear users in C...

Hi,I have a centralized deplyement with CUCM and Unity connection 8.5. My IP hones on the branchs have numbers in the following format 5[3 digits branch code]XXXX but when dialing within the same branch they don't have to dial the whole number they o...

Hello,I want to change the ring option for call pick up , by default in Service Parameter Configuration under "Clusterwide Parameters (Device - Phone)" the option :- Call Pickup Group Audio Alert Setting of Idle Station = Ring OnceCall Pickup Group A...

Hello AllI know this may seem a strange question but I am struggling to find an answer to it and am hoping this is the correct place to post the question and get an answer.Our organisation currently has a CUCM cluster. When new phones are needed the ...

Dear All ,  I have one Voice Gateway cisco 3800 and call manager 7 . i want to block all incoming Call from outside to EXT :111, 222 , 333 and make this EXTs available just  internal or inside the CLUSTER  . i tried to use translation profile on the ...