Unified Communications Infrastructure

      HII wanted to know is there a place that I can download visio stensils specific for Unified Communications. I'm putting together a diagram of how our cube router works and I wanted to use the actual cube router icon and a CUCM icon as well. Tha...

Hello All, I know there are a lot of posts regarding this issue and I have followed the advice but still I am facing the high active partition even after changing the High/Low Watermarks, restarting the Log Service Tool.I also don't just want to dele...

Can we use IP Communicator or Softphones in SRST mode during a WAN link failure scenario? or is IP Communicator not supported to register to CME in such cases?

HiWe have a 2 node CUCM cluster running on version 12_5_1_10000_22 on the EVE-NG environment in our lab. There are hardly any devices configured on the servers but the CUCM performance is very very slow.IT takes upto 5-6 minutes to print the DB repli...

In MCE I see I can place a put order for both BE6/7K-VIRTBASP-7X and BE6/7K-VIRTENH-7X.However, I am not sure which order I should place for which server or does it not matter?I have a mix of C220M4, C240M4 and 1 C240M5.Thanks in advance

Now, Cisco embedded vmware have 2 version Basic Plus and Enhanced.What is different for those 2 versoins? BE6/7K-VIRTBASP-7X = Cisco BE Embedded Virt. Basic Plus 7x, BE6K/7K onlyBE6/7K-VIRTENH-7X  = Cisco BE Embedded Virt. Enhanced 7x, BE6K/7K/CMS1K ...

Hi.  I'm trying to get a count of all of our active VoIP device types.  I stress the word active, so I'm looking for a count of device types that have an IP address or have a status (registered with a server).  We have thousands of phones so a manual...

Hi Community, My provider (ISTP) is asking me to send the Invite, in this SDP message to appear the IP (189.204.181.121) of the interface that is connected to the service in the from parameter.CUCM (10.210.160.17) <---> (10.210.50.250) CUBE (189.204....

We have enable SSO for CUCM but now we have a few accounts(local users) ex: Service Desk Admins who used to be able to login to CUCM/user to change call forwarding as per their requirement. Now they are not able to login. Is it possible if i have the...