We have an issue with the following. Any assistance would be greatly appreciated.We have SIP trunks that terminate on our Call Manager which is 7.1.3. We take the call from the SIP trunk (Remote DID) and then "translate" that number to a local 4 dig...
HelloI'm looking for information on how to install 2 newly purchased cards and keep running into dead links. The cards I bought are for a CISCO-2801-CCME/K9 with PVDM2-8, FL-CCME-25, SP Services 128F/256D cisco router:vic3 2fxs/DID and a vic2 2fxo...
I have to the Unity data from a old Unity 4.0.5 box that is dying to a new Unity box which is licensed and has no Unity software on it currently, but will have 4.2.1.Can I do the following ...1. Run DbWalker2. Run DiRT3. Install the EXACT old version...
Hi Cisco,We are trying to add a couple of existing subscribers into an existing public distribution list. Under the PDL called "Floor Clients", I goto Members, click on Add Selected Subscribers and when I do a search of the for the subscribers extens...
Hi, I have created a new distribution list in Unity voicemail V5.0, added the users and addedthe recorded message. But how do i push this out to the phones so it arrives as voice mail.Regardsdominic
I have installed the current CUCiMOC 7.1(2)-1.4.6 in a OCS 2007R2 system, configured the server (UCM 7.1), etc. When I launch Communicator the conversation pane for CUCiMOC does not open. The Tools for CUCiMOC are present on the Tools menu, but whe...
I get e-mail alerts daily about MGCP gateways decreasing or increasing and also MGCP D-channels going out of service. When I look at the alert detail in RTMT it shows me what gateway is having an issue, but the e-mails don't specify anything but the ...
We have two unity connection Servers (version 7.1.2) in our cluster. We are getting an engaged tone when users check the voicemail . This is only happening intermittently. When I check the Log I found following messages Severity: WarningApp ID: C...
Hi,We are using Unified Communications Manager and currently have a hosted Microsoft Exchange 2007 Server. We would like to use the two together but not sure where to begin and what is required (if anything ) between our Office and that of our host...