Unified Communications Infrastructure

Hi All,i am new with CUMA so i need to know high level feature CUMA & CUMC provide that we can encourage our customer for this product.your help is much appreciateThanks,

I have a set of guards who work different shifts, each with their own email address.  I would like to enable an onsite alert for each guard's email, but not alert the phone.  In CER 7.x I see you must enter a phone number,  all of the guards share th...

Hi,We are having problems in the integration of the new MCU 5110 as "Conference Bridge" in the CUCM. The MCU is registered in the CUCM with we cannot use the ad-hoc feature on the phones. Once me make the video Call between two phones everyting is fi...

I have a customer currently on Unity voicemail only going to unity connection. since the existing is a simple config i wont be using COBRAS, but rather manually configuring their new system. Is it possible to build the unity connection out in my stag...

Hello,I just installed CUCM 7.1.3 in my test lab and also have got CCME 7 on cisco 2811(IOS version 12.4(24(T)).On CUCM 7 I have got range of number 6000-7000registered phone 6000ON CCME I have got 2000-3000registered phone 2000normaly in order to ca...

Got an existing cluster (6.1.4) that has a dial plan problem. The Line has a partition with an unfiltered 9.@, and the device has a partition with route filter 9.@ with route filter for Emergency calls (needed to ensure correct routing as all users a...

Dear readers,This is my very first post, so I apologize for any newbie behavior that could show up in this post!We have a 2 node cluster of Cisco Unified Callmanager 5.1.1 and we have been facing issues with CAR, the problem seems to be the following...

Hi, in this days I try with integration in object, i have interconnect the pbx hipath 8000 in sip trunk with cucm 7.0, the ccbs (call back, call completition on busy) don't work, i think it's not supported (why?) the other supplementary service are o...

Hello,I am working with a customer who currently has ~6000 users on a network consisting of a mix of model 30, 70 and 80's using cornet package 9006.6 with Phonemail 6.4.3. The customer is moving ~550 users to two new locations and is looking at what...

I am going to be upgrading  out Unity 5.0(1) to Unity 7.0 and looking for Cisco's Upgrade Guide from 5 to 7. For some reason when I go to this link http://conft.com/en/US/docs/voice_ip_comm/unity/7x/redirect/7xinstallupgradeinfo.html  I am only seein...

We have a IPCC server (CRS 4.0.3) running on a Windows Server 2000 SP4 platform. The server is working along with a Callmanager 4.1(3) in a WORKGROUP environment and there’s no domain. The clock on the IPCC server is recently acting very weirdly (bac...

I've got 5 sites each with CME running on a 2811. The default MOH (music-on-hold.au) has been working w/o any problems. We have had a professionally produced MOH file (in .wav format) that we would like to get into all the systems.I've gone in an u...

Hello, I'm using Cisco Berbee InformaCast with a Bogen overhead paging system. I have Call Manager 6.1.4 and would like to know if there is a way to broadcast the name/number of the IP Phone from which the page originated. If anyone knows of a means ...