Hi all need help with finding out if it is possible to bulk remove users from access control group on cucm ?? help will be appreciated
Hi all need help with finding out if it is possible to bulk remove users from access control group on cucm ?? help will be appreciated
Good evening, When trying to perform a manual backup in 10.5.2, I don't see the subscriber. I recently restored the publisher and dbreplication is 2 and the cluster is stable and working 100%. Any suggestions would be most helpful.
I have ISR 4321 Cisco and this configuration Router#show running-config interface virtualportGroup 1Building configuration...Current configuration : 70 bytes!interface VirtualPortGroup1ip address 10.0.0.1 255.255.255.0endRouter#show running-config ...
Hello! The CUCM cluster I am taking care has around a year without backing up. Just performed a scheduled backup a few days ago and it didn't work, I am using freeFTPd. These are the things I have done: - Ping from nodes to sFTP server > successful ...
Hello.We have a 2921 gateway on a site in the Netherlands. It is currently running with an E1 TDM connection to the PTT.It is also connected to a centralised CUCM.We are changing the external access to be a SIP trunk from the gateway to the PTT. Outg...
Jabber v12.8.2.52982 with CUCM v11.5.1.14900-11 Scenario: An agent using Jabber for Windows gets a call and has to transfer the call to their supervisor who is also using Jabber for windows. When they try and initiate the transfer, they can connect t...
We have an operator who transfers people to various call handlers. Most require caller input. However once a caller is transferred to a call handler and selects an option, the system responds by saying "You cannot be transferred to this number. Check...
I was going through the CUCM publisher' Certificate Management Page which I started managing recently and found that most of the certificates are under the name of a different publisher server which is not part of the cluster (maybe an old server, bu...
Howdy,I have a Cisco Unity Express configured to send VM messages via e-mail to users and it worked fine until a couple of weeks ago using a yahoo e-mail account/SMTP server.Initially I thought that Yahoo changed their SMTP server IP address since it...
I'm currently working from home, and my older laptop bit the dust this morning. I set up my newer Dell Alienware, and all was good. I'm using the same headset as always, I can hear everything fine (including ring tones), except call audio. People can...
Hello,I have a cisco callmanager express and the SIP provider gives us the following range number to be used to make outside calls. the range is from 555091900 to 555091999.These numbers are configured on users IPhones as an extension for making outs...
Hi everyone,Do you have any ideas why i can't pair my SX20 system with proximity on my pc ? the proximity software is running but don't find anythingI found it weird because it work perfectly fine with my other systeme which are webex room kit and MX...
while not sharing the screen in a webex meeting and trying to make it full screen it enlarged, but still fell significantly short of a full screen.
Hello,We have a semi-new 12.5 CUCM setup. I am currently experiencing the "License Authorization Status: Failed". on the Unity Connection servers only. When I run "Utils Diagnose Test" I get the reverse DNS lookup mismatch error. The entries in DNS a...
Hello there, We have CUCM version 10.5 and using Jabber clients for Android and iPhone. The problem is that when calling from user A to user B - which is using Jabber Client for iPhone, call connects, there is 2 way audio, but when B is transferring ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-14-2024 11:09 AM | ||
02-26-2024 12:21 AM | ||
02-19-2024 05:04 AM | ||
02-19-2024 04:36 AM | ||
02-11-2024 05:22 AM |
User | Count |
---|---|
6 | |
5 | |
3 | |
2 | |
1 |