Unified Communications Infrastructure

IPVC H.323 Name

Hi,I've IPVC3545 with Meeting place 6.0 and Polycom VSX7000 H323 endpoints. I've configured these endpoints in my "Video Administration" server. While scheduling the meeting the same (of video admin) database is used.The issue is, whenever I join fro...

Unity Connection Language File Error

Had a running Unity Connection 1.2 server. Recently the ports stopped answering and logging into the server revealed the following error:"The Cisco Unity Connection license file(s) that are installed do not allow you to use U.S. English for language-...

CCM's and Quadcore Xeon's

I've located the CCM server 6.1 hardware support matrix sheet on cisco.com, but it's not very detailed about what the servers are.I was looking to get an HP DL320 G5 with the Xeon dualcore 3050, however, that particular server setup doesn't support r...

Resolved! need assistance with call queuing (aka supervised transfer)

I'm running CCM 4.1(3) and Unity 4.0(5). If one particular subscriber is busy, I want callers to have the option to hold or leave a message.The problem I am facing is when this subscriber is busy, the caller hears about 2 seconds of MOH, then goes t...

CTIManager and attendant console server services are inactive in CCM6.0

I've been activated these services. Both services were started. But in the service parameter page shown "CTIManager (inactive)" and "Attendant Console Server (inactive)" How to solve this problem? Please advice.

Callmanager IVR codec issue ?

Hi guys, i have a 2821 router with a voice PRI terminating on it, we are placing CCM 4.3 on the LAN, i have following confusions so kindly help me out, We will be using G.729 codec throughout our environment so we will not be needing any transcoding ...

Using the "Calling Party Modification" option in CER

CER 1.3(2), CCM 4.1(3)sr4b, 7941 phone.I'm configuring the route patterns for CER, and found the "Calling Party Modification" option which supposedly lets you use a generic route pattern rather than having to have a separate route pattern for each EL...

Unity system administration hr=0x80042506 (E_LOGMGR_INVALIDSTATE)

Hi,We're setting up a new install of Unity 5.01 connecting to an exchange 2007.After following the last part in the setup guide (Setting Up Authentication for the Cisco Unity Administrator) to enable anonymous access to the system administraion page,...

Delay in message delivery UM 4.0.3 and Exchange 2003

Hi,Just upgraded to 4.0.3, very nice by the way! It seems that there is a delay from when a voicmail is left and when it appears in the users inbox. The MWI lights right away, but the message takes about a minute or so. I know no big deal, but my ...

Digital Voice Gateway CCM Licensing

Hi All,I'm designing a voice solution but got stuck on some CCM licensing issues.I need to connect a branch office PBX to a Cisco 2811 router with NM-HDV2-1T1/E1 and this router will then talk to a central CCM cluster. This branch office has 100 user...

Resolved! CDR-SQL Consult

Hi friends, does somebody knows how to convert the values of the fields like DATETIMEORIGINATION or DATETIMECONNECT in date format in CDR database, using queries?Thanks for your helpBest RegardsDavid

CRS 4.1 JTAPI Provider Setup Failing

when we start the JTAPI provider configuration we get this error and the configuration exit."enter a valid cisco unified call manager hostname ip address"

Call Handler - Call Transfer back to Call Manager extension

Help!!! Trying to get a Unity call handler to "call Transfer" to an extension number but unity cannot make the call and says "the extension you requested is not available right now" & then tries to leave a message but this also fails. This is all th...

Unity Connection mark as read after SMTP notify

Is there a way to have UC mark messages as read after a successful notification?My notifications are working correctly but if the user doesn't take an action after listening to the message then it will notify them again.

Need help on voice mail creation in unity

Dear Friend. I have an issue to sort out.One of temporary employee who is going to work for 3 months only in a company. we need to create voice mail without email facility. I do not want to create a separate voice but to create generic voice mail box...

Unified Communications Infrastructure

Forum Posts

IPVC H.323 Name

Unity Connection Language File Error

CCM's and Quadcore Xeon's

Resolved! need assistance with call queuing (aka supervised transfer)

CTIManager and attendant console server services are inactive in CCM6.0

Callmanager IVR codec issue ?

Using the "Calling Party Modification" option in CER

Unity system administration hr=0x80042506 (E_LOGMGR_INVALIDSTATE)

Delay in message delivery UM 4.0.3 and Exchange 2003

Digital Voice Gateway CCM Licensing

Resolved! CDR-SQL Consult

CRS 4.1 JTAPI Provider Setup Failing

Call Handler - Call Transfer back to Call Manager extension

Unity Connection mark as read after SMTP notify

Need help on voice mail creation in unity

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM 12.0 to 12.5 PCD migration

CUCM Constantly Disconnecting TCP Socket

"Service Manager is currently busy" After Restarting Cisco XCP Router

Secure SIP integration between CUCM and IM&P...

Monitoring/alerting for issues with Unified Messaging and Speechview

CUC Port Group

Enterprise Mobility Management (EMM) Alternative Configuration Fields

MRA Expressway E complaining about RMS License "Out of Compliance"

Oauth access tokens

How integrate two CUP server with different domain ?..