Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
CallManager Help pages give error:The requested resource (/Help/en_GB/ccm/ctx/ccm_enterpriseparamsnew.html) is not available.They work fine in Unity Connection. Any ideas?Rich
HiI have 2 unity servers running 4.0SQL replication between the servers is working OK. The Primary serveris doing the Push.Problem is there is an issue with the Unity Voice-Mail ports on the Primary server. When active after a while the server stops ...
I'm working on configuring SRST between CM 6.0 and 3845 router with CME on the router. I just came across the following restriction;The call-manager-fallback command, which is used to configure Cisco Unified SRST, cannot be used on a router that is c...
Can someone point me in the right directions for some good resources on creating xml phone services. I know how to add them, but would like some good sources on actually developing them. Thanks in advance.Erik
I have a customer that we recently installed CCM 5.1 for...thier old system would notify them that the number being called was on the phone when they called...We have installed AC for some of the users but this appears to be the biggest "issue" thus ...
We have a 3845 ISR voice-gateway currently working with CME via SIP. I'm trying to configure the gateway as a MGCP gateway for Unified Manager 6.0. I cannot find MGCP configuration information for the 3845 ISR. Can someone point me in the right direc...
Hi, Have an issue where unity plays back choppy/garbled audio at a remote site across a WAN only when file transfers are occurring for calls coming in on PRI at remote site. When a IP Phone calls into unity or a IP phone at the main site (G729) the q...
Hi there,I get this error message (logrotate ALERT exited abnormally)when perform LDAP in CCM5 environment.When I configured 1st time it synchronised but subsequently never did. I didn't realise untill I had to deal with new users. Can any one help p...
The network engineer changed DNS server settings on CM1, CM2, Unity and Exchange servers. Coincidence but Unity server has been rebooted and Unity is not able to start. I have rebooted CM1, CM2, Unity, and Exchange in that order with no success. What...
I am interested in the implications of having a CCM server (5.x) integrated with AD. If the user accounts are forcibly disabled, they will be marked inactive and removed after 24 hours; however, if the CCM server fails to sync with the LDAP director...
We have a Cisco Call manager Express running 4.1. We have 7961G phones with 6 lines. I have the first two lines on each phone setup as personal lines. The Last 4 lines for each helpdesk staff are to be helpdesk lines. I would like all phnes to repres...
I recently used the Product Upgrade Tool to order both Unity 5 and CCM 5.Nethier sets came with a Product Authorization Key. Nothing in the paperwork, nothing on the CD sleeves, no follow up email.Is this what Cisco is doing now? Not attaching PAK k...
Hello,I just made a fresh install of CUE Editor 3.0.1 on my PC (WinXP SP2, Sun Java VM 1.6.03) but it refuses to start!When I click on "Cisco CUE Editor" item on Start menu I can only briefly see splash screen and then nothing...Tried with 3.0.2 vers...
