Hi Team I would like to know if there are any APIs available for the CUCM "Disaster Recovery System" part. The idea is to use APIs and see if we could automate the "Manual Back Up" Process . Thanks in Advance
Forum Posts
Hello,I need info about ESXi version upgrade on server BE6000 (UCSC-C220-M4S) ?* For minor release* For major releaseBE6000 have contract running.Can we upgrade to last ESXi version ?Do you have some documentation and/or procedure to upgrade it ?Than...
Hi,we are getting the below events on expressway -e 2021-02-10T14:26:14.648+03:00 traffic_server[7829]: Event="Sending HTTP error response" Status="403" Reason="Forbidden" Dst-ip="104.128.83.98" Dst-port="37247" UTCTime="2021-02-10 11:26:14,648"202...
YPHi, I have a bit of an issue due to Cisco's limited recording options! We have CUCM with 8800 phones & CUBE HA for PSTN access.Requirement is to capture point-to-point, SNR and all forwarded calls to PSTN for given users. I don't think there is any...
Resolved! SSO with CUCM 10.5 and ADFS 3.0
Hello, We recently updated our CUCM/CUPS/CUC system to 10.5 in order to take advantage of the SSO capabilities that are now built in. All of the documentation points to ADFS 2.0, and we have an ADFS 3.0 implementation. I am trying to figure out if ...
Hello Community, I am looking for a recommendation for improving the quality of voice for some Jabber users with high latency on their internet access. Users are registered to CUCM through Expressway. Thanks
Hello - Version 11.5.1 We need to change the message aging policy on a portion of the users on system. We have created a new policy but are trying to figure out how to update the 400 users without touching each one individually. We do not see anythin...
Hello , I have a cucm 12.5 and working with IP phone 7811, I can login with no issue to my EXM, the issue is when I want to logout I get the error , "Error File Not Found" I check the Link for the Phone services and is the same I have for other clie...
Hi,I have a CUBE between ITSP and CUCM. I would like to modify the From header received in the incoming INVITE and use it in the outgoing INVITE Received:INVITE sip:+496xxxxxxxx46@192.168.1.10;user=phone SIP/2.0Max-Forwards: 68Session-Expires: 3600...
Hi, I'm following the guide: http://cdesigner.eu/content/14-cucm-8-free-sftp-solution-backup-ubuntu-1004-serverTo install the ubuntu 15 as OpenSSH SFTP backup, but it got the fail on it Error: Unableto access SFTP server. Please ensure the username ...
Hi Guys I will be most grateful if someone can assist. 1. When we enable encrypted profile for the User, the device does not register over MRA. However, when we enable non encrypted profile for the User, it registers properly with the CUCM. This user...
Resolved! Unified Communication Test-environment
Hello,I am trying to build a private lab for myself as a test environment. For this purpose I would like to connect my CallManager with CIPC.The question is; Do I need a Windows Server, DNS etc.? ?or in other words, what do I need to build this envir...
Hello Community,I am trying to follow the link bellow to change the DST.https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118744-technote-cucm-00.htmlIf I understood, according the section "D...
I am running CUCM 11.5.1.17900-52, and I am having troubles with the custom background files being served from the tftp server. I have uploaded all the same files to all three nodes of the cluster. When the phone attempts to retrieve t...
Hi All I have configured Billing Application server parameter to save my CDR and CMR files.After configuring the billing server parameter I see 6 files in 1 min on SFTP server.Is there any way I could make it like to generate only one file per day (o...
