Unified Communications Infrastructure

HI All,Getting some issue with CUCM vs Analog/VoIP GW. Also called FXOFXS GW(from PATTON)Indeed, whereas SIP Trunk is up from CUCM to Analog/voIP GW, Analog/FXS users from this GW can not REGISTER on CUCM(they are declared as Third-party SIP advanced...

I have a situation where all calls going out a specific SIP trunk are having all caller ID masked as 703XXXXXXXXXX. (Not happening on other trunks.) It is not an External Phone Number Mask.It is not a translation pattern, or a field on the Route Patt...

Hello Team,I will perform CUCM minor upgrade from 11.5 SU3 to 11.5SU6I was running ciscocm.preUpgradeCheck-00022.cop.sgn on each node and noticed something, Publisher:*) You have 42 GB of required 25 GB common partition space required toupgrade. Subs...

Customer is asking if we can modify a SIP response code.  Specifically, when the CUBE receives a 487 (busy) response, the customer is asking us to return a 503 to the other leg. Is there a way to do this?

Dear all, we setup our Cisco Roomkit devices with presence enabled in CUCM:Service Settings all enabled:Home ClusterEnable User for Unified CM IM and Presence (Configure IM and Presence in the associated UC Service Profile)Include meeting information...

CUCM = 11.5 Avaya Session Manager ------SIP Trunk--------> CUCM -----SIP-----> Cisco SIP Gateway with PSTN. Working Call flow = Avaya H323 IP Phone calls to Cisco SIP phone as an extension, working successfully, vice versa also working successfully.N...

Hello All, I have almost 20 servers with UCOS. which inclued CUCM, CUC, IM & P. I just want to know if there is a way to excute a script to capture the output of set of commands. For Ex: 1. Show status2. Show ntp status.3. Utils service list.

I don't want to see OPTIONS pings in debug ccsip messages, is there a way to filter these out? IOS 16.09.04

Hello community.We have iPhone 8, IOS 13.3.1 and newest Jabber app installed.A contact on the iPhone has email address in the form "name@meeting.domain.de".This is also the SIP URI for a meetingroom on CMS. If we use Apple callkit to longpress the ph...

Hi Everyone, Do we need to get a support contract for below part numbers? We are not performing any upgradation. Thanks  LIC-UWL-STD-AServices Mapping SKU, Under 1K UWL STD usersUPG-CUCM-BASIC-AUpgrade to UC Manager BasicMIG-VCS-UCM-ENHMigrate 1 desk...

I found an article on installing the RTMT on a Mac, essentially using the Linux version.  However I am running into an issue that I'm wondering if anyone has seen before. When I try to run the .bin file with Java (sh ./CcmServRtmtPlugin.bin java), I ...