Unified Communications Infrastructure

FN-70379 - Preventing the problem

Regarding: https://www.cisco.com/c/en/us/support/docs/field-notices/703/fn70379.html Basically, the next time you try to reboot after you upgrade vmtools, your UC box may not boot. To fix it, you have to boot to CD and rebuild your 'initramfs' file....

CUEAC 9.1 - Blind tranfer to external numbers fail

I have a CUEAC 9.1 and CUCM 9.1.2 and if a a internal call is made to the operator and the operator tries a blind transfer to an external number the call is dropped and the original caller (internal extension) stays on hold in the operator queue. If ...

More than one SRV record for Expressway E

I would like to have more _collab-edge SRV Records, to make possible the first Jabber login with more than one domain:_collab-edge._tls.domain1.comSRV hostname exp.domain.com _collab-edge._tls.domain2.comSRV hostname exp.domain.com _collab-edge._tl...

Issues with Jabber MRA Softphone not registering

Hi AllWe have installed a Cisco Expressway C and E that connects to our CUCM.We have enabled MRA for Jabber.For some reason Jabber can connect to presence and VM, but the phone services part is not working.We have uploaded the logs into the Cisco Col...

Auto attendant prompt management

Good morning, we have Cisco Unified system UC-560 and Cisco configuration assistant 3.2(2) and I was ask to setup voice prompt that when a caller called the office it gives them the following menus please dial - 1. For Attendance- ...

Any production VMware cloud Collaboration user out there?

I'm exploring solutions for a client that want's all services to be off-prem. I looked into Webex Calling and Broad Cloud but both have severe limitations for y requirements. Has anyone deployed CM or other Collab applications to VMware Cloud in AWS ...

Notification RTMT Number of media resource list exhausted

HelloI hope you are wellPlease I need your advice on this notification which is displayed on the RTMT monitor of my CISCO TOIP platform ''Number of media resource list exhausted'' and I can not understand where it's coming from and if it's a hardware...

Group Call Pickup inter group notification

Hello everyone, I would like to set up two pickup groups that are associated between themselves and use Opickup to allow them to take each other's calls when required. This technically works. The issue I am facing is that the two teams are not close ...

Group chat - Stay in the group chat after logging out

Hello, Today, if a user creates or in invited to a group chat (not to the persistant one) and the user (Windows or mobile client) logs out, the user automatically leaves the chat and cannot enter again to the group chat by himself. Is there any w...

Resolved! Cisco's IVR: CVP, CUC, UCCX...???

Hi I am new to this and I have some basic working knowledge on CUCM, but no knowledge on CUC/UCCX. A customer has generated a requirement for IVR, and while I was exploring, I came to know that there is CVP IVR, there is IVR in Unity as well. And UCC...

Resolved! CUBE Sip Profile to change FROM CLID- Error: Invalid Pattern-quote is not escaped

Hello,Our SIP Provider expects in From field the main number in order to allow the call but it also expects CLID in FROM field. They don't use Contact or remote party ID or PAI to identify the Orginating Caller ID. e.g From: "123456712" <sip:12345670...

Incoming UDP is not working for Natted IP

Hi All,I have Natted IP address from 192.168.X.X to X.X.X.X . when the call is going out over SIP Trunk, outgoing call is working fine. But for the incoming call . Its giving no way audio. Please help me to confirm if there is a way to allow incoming...

Resolved! Migration & Upgrade CUCM/CUC/UCCX

Hi,I need to migrate and upgrade CUCM/CUC/UCCX, it is my first migration and I am confused about what is the best way to do it. host: UCS C220 M3S to UCS C240 M5SXversions: 10.5 to 11.5 CUCM: upgrade and migrate with the PCD. I do not see any proble...

How to connect 10,000 CPE Trunk with Cisco Call Manager?

Dear all;I have a real-estate project that the sizing for the project will reach 10,000 units and in every unit, there is CPE that will connect IP Phones, Analogy Phones, Internet and IPTV.And I make trunk between CPE and Call Manager but there are l...

Resolved! N/A

N/A

Unified Communications Infrastructure

Forum Posts

FN-70379 - Preventing the problem

CUEAC 9.1 - Blind tranfer to external numbers fail

More than one SRV record for Expressway E

Issues with Jabber MRA Softphone not registering

Auto attendant prompt management

Any production VMware cloud Collaboration user out there?

Notification RTMT Number of media resource list exhausted

Group Call Pickup inter group notification

Group chat - Stay in the group chat after logging out

Resolved! Cisco's IVR: CVP, CUC, UCCX...???

Resolved! CUBE Sip Profile to change FROM CLID- Error: Invalid Pattern-quote is not escaped

Incoming UDP is not working for Natted IP

Resolved! Migration & Upgrade CUCM/CUC/UCCX

How to connect 10,000 CPE Trunk with Cisco Call Manager?

Resolved! N/A

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM 12.0 to 12.5 PCD migration

CUCM Constantly Disconnecting TCP Socket

"Service Manager is currently busy" After Restarting Cisco XCP Router

Secure SIP integration between CUCM and IM&P...

Monitoring/alerting for issues with Unified Messaging and Speechview

MRA Expressway E complaining about RMS License "Out of Compliance"

Oauth access tokens

How integrate two CUP server with different domain ?..

CuCM SQL table for shared lines

CUCM CentOS end of support