Unified Communications Infrastructure

Resolved! Block Outgoing Calls

Hi, Is it possible to block all outgoing calls except for internal calls and calls to few 0333 numbers on a specific phone using route patterns on CUCM? The user would like to basically limit the staff to only be able to dial specific numbers on that...

ESXi upgrade on UCS-EN140N-M2/K9=

We are using ISR4431-V/K9 on which UCS-EN140N-M2/K9= module installed we are planning for install ESXi 6.0 latest patch on it..is there any special document for this hardware UCS-EN140N-M2/K9 or ..it is just like normal UCS B or C series , BE6K s...

CUCM 11.5 and Skype for Business Conference Fast Busy

Skype for Business 2016CUCM System version: 11.5.1.14900-11 We're working on integrating CUCM and Skype For Business 2016. We currently have a trunk set up between the two, it is fully up and working. We can use the Skype for Business client instal...

Cisco Spark Proximity - AudioPairing - self token not decoded

Hi all, I have a Cisco MX700 registered to the Cisco Spark cloud, and I'm seeing this error (on the touch panel) when running the Sound Test. AudioPairing - self token not decoded Unable to verify device pairing capabilities "Unable to detect the u...

Unity Connection VMware Tool

Hi, I have received BE6K received from cisco pre loaded with Unity connection. After completing the installation of CUC.I reloaded the CUC. I observed a CUC VM has not VMware tools. I was unable to access the CUC via CLI/Console/GUI.for reference scr...

Unified Attended Console - How to obtain accurate account of users for licensing

Hi, We need an accurate account of how many people are using our UAC to see how many licenses will be needed. Can anyone inform how to obtain this information? It would be greatly appreciated. The version in 10.5. Thanks.

Licensing - CUCM - Assistance Required

In need of assistance. TL/DR - How do I find out How Many Licences I have, and How Many are being used? I have logged onto our CUCM PUB server and am being told we have insufficient licenses. No users have joined the company in the last three weeks b...

Cisco Unity connection crash v12 each time

Hi, Whenever I install a CUC on BE6K and BE7K it crashed every time. Can someone help me. Abdul karim

CUCM and IMP configuration and validation error - Duplicate Post

Edit: Sorry, somehow a post got duplicated. Getting Configuration validation failed for first IM&P Node. Version Info: CUCM Version: 10.5.1.15900-18IMP Version: I had to use bootable 11.5.1.13900-52 and install patch for 10.5.1.15900-18The platform i...

CUCM and IMP configuration and validation error

Getting Configuration validation failed for first IM&P Node. Version Info: CUCM Version: 10.5.1.15900-18IMP Version: I had to use bootable 11.5.1.13900-52 and install patch for 10.5.1.15900-18The platform installation panes I am on for IM&P display 1...

Issue with forming a SIP Trunk with ITSP

Hi All, I am having problem forming SIP trunk with ITSP. CUBE is getting dhcp IP from ITSP device. CUBE is also sending SIP register request but not receiving any response from ITSP device. I am not sure what is blocking the SIP response message from...

Practical method to import Avaya Messsaging greetings to Unity Connection

Hello,Do you know of a way to import Avaya Messaging greetings to Unity Connection?It would need to be done for approximately 2000 Mailboxes.Presuming the Current Avaya greetings can be exported as media files, as a last resort they could be manually...

cucm restore conditions?

i checked the documentation for the restore requirements , it listed the "deployment type" , what do they mean by that? "Before you restore Cisco Unified Communications Manager, ensure that the hostname, IP address, DNS configuration, domain name, ve...

Cisco VGW 2901 recovery for configuration

We are facing issue with the Cisco 2901 router which we are using as a Voice Gateway & this become faulty & not power ON...& unfortunately customer not with backup configuration...& we have new Cisco 2901 router on Site...is any way we can take old c...

Getting error "Http 404 not found" while accessing CUCM GUI..

Hi,Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.Please find attached screenshot for ur referance.Thanks & R'sHarish

Unified Communications Infrastructure

Forum Posts

Resolved! Block Outgoing Calls

ESXi upgrade on UCS-EN140N-M2/K9=

CUCM 11.5 and Skype for Business Conference Fast Busy

Cisco Spark Proximity - AudioPairing - self token not decoded

Unity Connection VMware Tool

Unified Attended Console - How to obtain accurate account of users for licensing

Licensing - CUCM - Assistance Required

Cisco Unity connection crash v12 each time

CUCM and IMP configuration and validation error - Duplicate Post

CUCM and IMP configuration and validation error

Issue with forming a SIP Trunk with ITSP

Practical method to import Avaya Messsaging greetings to Unity Connection

cucm restore conditions?

Cisco VGW 2901 recovery for configuration

Getting error "Http 404 not found" while accessing CUCM GUI..

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM 12.0 to 12.5 PCD migration

CUCM Constantly Disconnecting TCP Socket

"Service Manager is currently busy" After Restarting Cisco XCP Router

Secure SIP integration between CUCM and IM&P...

Monitoring/alerting for issues with Unified Messaging and Speechview

CUCM CentOS end of support

Easiest way to greeting a call before hunt then voicemail if no answer

Mass Delete Messages in Mailbox

Enabling TLS 1.2 on CUCM

ESXi versions and Call Manager Versions