I support 20 school campuses, three additional buildings, and various departments within the administration building. I am using user templates to set the Caller Input for 0 so that the Operator extension points to a receptionist or secretary nearest...
Forum Posts
Hello, I've been tasked with repairing a non-working fax line. I do know the full phone number in question and that it is a DID number. Is there a way in CUCM to find the number or any information about the number in question. The closest that I've b...
ON CUCM 14SU3 EnableJabber2TeamsMigration does not show up i policies on jabber configuration file. Any idea why?it shows on https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2024/pdf/BRKCOL-2062.pdf
A change was recently made on one of our Rightfax Servers to use G.711 instead of T.38 and outbound faxes now drop at 15 minutes (change was made to avoid ongoing T.38 issues with transmission errors)We see the initial outbound invite where the fax e...
Hello, We have an issue for outgoing calls through a PRI (MGCP). Call Manager is sending the Display (Caller ID), instead of the ASCII Display (Caller ID) for all external calls. Do you have an idea?
Hi Everyone I have some issues after upgrading from CUCM version 12.5 to 15 SU1, the NTP appears warning as unreachable. I tried to check the status in the cli, but the status is stopped but if I try to start the service the status service is runnin...
Hello, I just received some new 9851 and 9861 phones and cannot get the phone services to connect with jabber. I have CUCM 12.5.1.14900-63 and IM and Presence is 12.5.1.14900-4
I'm struggling to find the instructions on how to install a CA signed HTTPS certificate to PCD. Can anyone point me at the right place?Thanks,Gordon
Hello. I will have a small branch of 3 to 4 offices where I need to provide VoIP phones. These phones will only be able to call between offices. They will not be able to call outside. I am considering recommending Cisco Unified Communications Manager...
Planning a CUCM and CUC upgrade using the Fresh Import Install. It's version 11.5 and also has a UCCX 11.6 attached to it. Couple of questions. 1) Are you supposed to run the upgrade export on all the nodes in the cluster? Then on the install run the...
I have experienced, that the correct inbound dial-peer is not selected, and the call not sent to an outbound dial-peer. I'm using are rather long list, that seems to kick in, even though there is no match there but a match in another list with a wild...
I have a list of users and extensions I need to bulk change their voicemail pins. Is there a template to import into Unity for this? Cisco Unity Connection version: 14.0.1.12900-69
Hi, looking for a steer. Having problems with some, but not all, outgoing calls to specific numbers. I've traced this and we can see "483 Too many hops" messages coming from the SIP trunk provider. I can see that CUCM is placing "Max-forwards:13" ...
Hello,I have a question about updating Unified Com applications (CUCM, CUC, IMP) to version 12.5.In the precheck, it is indicated as follows:If the previous two checks pass, the test checks if the server is using the ext3 filesystem and marks the tes...
Hi, We have users with line appearances to each other DID's on their 8851 phones. If a user pickups the other user DID call and places the call on hold, the intended user for the call can't pickup the call that was placed on hold. Can someone confir...
