Unified Communications Infrastructure

I have a BE6K C220, this server has a vmware esxi 6.5, and need to connect that with two cables as aggregation to trunk ports on the switch, how can I do that, what can I do on the vlan option on the esxi console and must check the two nic boxes? wha...

I have a piece of equipment we are trying to replace with something more commercially available.  It sits between our CUCM server and our Voice Router, along with a layer 2 switch.  It takes our CUCM traffic and converts it into a T1.  Our Voice Rout...

Hi all,  installed Prime 3.5 today but I entered the wrong password multiple times for "root" when trying to access the GUI.Now it tells me "This account is locked. Please contact the Network Admin for assistance or rety later".How do I unlock the ac...

I have a VWIC2-2MFT-T1/E1 card in a 3825 router.  After a power outage it is no longer connecting.  When the router is powered back up both ports on the T1 card have the Alarm light on even without any cable plugged in.  Is this a configuration error...

Hello  We have a cucm version 6.1.4.2000-2 and need to upgrade that to 12.5. this old server is located on MCS and bought a new ucs BE6k. so I need the steps to for this upgrade and migrate ? Thanks

When call forwarding is off,  incoming and outgoing calls on CUCM works correctly to all directions(to mobile, to different cities, to different countries). The CUCM connection is that: IP phones - CUCM - MGCP gateways(Cisco 2921) - PSTN. We have 6 d...

Quick note to reach out and see if anyone here can recommend a Cisco related job board to post this (https://www.edjoin.org/Home/DistrictJobPosting/1240370) We have an open position for a Telecommunications Analyst (To assist with our Cisco UCM and U...

Hi, I have a problem, I need to change bussy trigger setting on a line, but it shows like fix text, how can I enable it to change it.

We want to allow users to log into Jabber with their 'mail' attribute as their Jabber User ID.For example user Anita Perez works at Acme Corporation.sAMAccountName = aperezmail = anita.perez@acme.comTypically, Anita would log into Jabber with the def...

I confirmed unauthorized access from the backdoor on the Acano edge server.Software version 2.2.8Please tell me.Do you need any countermeasures?Is it okay to use it as it is?

Hi, I have a problem with a phone, for external calls the call is successful, but only the remote device can hear. How can I solve this.

Hi, how can I configure a phone with Call Manager in a way that if I pick up a call and another enters, it is displayed in the phone display.