I'm testing/piloting Cisco CMS (2.3.6) as a likely replacement for our Conductor/TelePresence infrastructure. I have both CUCM and VCS as call controls. I managed to configure CMS and join a space that is pre-created. Our current Conductor/TelePr...
I'm testing/piloting Cisco CMS (2.3.6) as a likely replacement for our Conductor/TelePresence infrastructure. I have both CUCM and VCS as call controls. I managed to configure CMS and join a space that is pre-created. Our current Conductor/TelePr...
HelloI am setting up Speech Connect and when testing it I've found after you speak the name of the person you want to contact it will ask "Who may I say is calling?"This prompt is fine and I know where to turn it on/off, however is there a place on U...
All,I was wondering if anyone has any insight in the process for rebooting expressway environment (C & E)What is the proper proceedure?What would be your pre- post checks?
We have BE7K Server which is connected to Cisco 2960-X stack switch. We are facing reachability issue with CIMC, ESXi and VMs installed on this server. It been observed that When we use default 10-Gig ports of UCS for connectivity with Cisco 2960-X s...
Hi Guys,Can I check CM-AD connectivity? My clients cannot login to Jabber and the authentication is using AD account. The users who already logged on are not affected, but the users who reset their Jabber or not yet logged on cannot login into the sy...
are there commands that can be used in the CUBE to determine if the connection to the service proivder SBC is good?Looking for medica and signaling address related information going to the service provider please.thanks,paul.
After installation of the IM and Presence Server 11.5 I cannot access it through the web browser. When I type in the IP address of my newly configured server it gives me the error "This site can't be reached." I was able to activate all the services ...
One question please, Regarding the USB eToken, I used my PC to install the two USB security Token using the Cisco CTL Client. the question is after installation and everything is ok, I must keep the two USB eToken connected to my pc or the server per...
Ran into a small issue when I asked my network folks to create some Internal DNS SRV records to support my Expressway C setup. Using the Cisco Expressway Basic Configuration Deployment Guide X8-11-4, Appendix 2: DNS Records I pretty much used whats i...
Hi,DX80 device, when i am trying to register it with CUCM, is showing Failed: 485 Ambiguous / Device type mismatch.If i register it with VCS, it gets registered.Is there any compatibility issue with CUCM.Kindly help.The event log file of DX80 is atta...
I have a user who would like to have all calls from a specific number go straight to his voicemail. But, only that caller. How can I accomplish this? If the number calls any other phone on the call manager, it should go through.
Hi,Some Auto Attendant systems allow a caller to dial an extension or speak a name but with Unity I can only seem to accomplish one at a time. A voice enabled Directory Handler doesn't seem to allow you to through-dial if you know the extension you w...
I have a call handler setup with caller input. The green instructs them if they would like to leave a voicemail to press 0. Under the caller input - 0 I have the Call Action set to "Take Message".Is there anyway to record a greeting before the reco...
Hello, we installed 2 IM & presence servers to test Jabber and now we have decided not to use it. I googled how to remove safely those 2 servers but did not find any documentation. Has anybody already done such a thing and could give me some pointers...
So i'm currently over my licenses usage, I have PO out for additional licenses to become compliant, however, that is taking longer than anticipated to process, is there anyway to delete users/devices from the cucm to become compliant with the license...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 03-26-2025 10:13 AM | ||
| 03-17-2025 04:24 AM | ||
| 03-17-2025 02:02 AM | ||
| 03-11-2025 03:38 AM | ||
| 02-27-2025 06:44 AM |
| User | Count |
|---|---|
| 5 | |
| 3 | |
| 1 | |
| 1 | |
| 1 |