Unified Communications Infrastructure

Resolved! CUCM 11.5 Call Pickup issues

Hi, I'm having problems with Call pickup in a brand new set up: +CUCM has a sip trunk against a Huawei SBC +Cisco phones are configured in SIP. A->PSTN->SBC->CUCM->B When A calls comes from the outside and some member from the line group tries ...

Resolved! CUCM License Migration from 9.x to 12.x

Hello everyone, we are planning to upgrade a customer's 9.1 cluster to 12.x. Now, there are some concerns regarding the licensing. There are 1100 UCL/UWL licenses, which do not have SWSS any more. Do we need completely new 12.x licenses? Or is i...

Resolved! Unity Connection extension in use

hi, we have Connection v 8.62a, fully populated , working fine. Only issue is we need to create a user with a particular extension yet the system reports extension is in use. We cannot find the extension anywhere, users, call handl...

IP Address change process and Impact

Hi, I am planning to perform below steps and need your expertise to confirm if going in right way and will wokr as it is mentioned below. if need changes please advice me: below all uc applications version 9.1.X.12XXX-XX 1> cucm sub ip change in cl...

CIMC IP from vSphere

Hi, Is anyone aware if there is anywhere in vSphere or other location to identify the CIMC IP since ESX 6.0.0 removed the tab to locate this info?

Collect CUCM trace file about media resource allocated

Hello Everyone, I am troubleshooting a one audio issue. I would like to know which MTP and Xcodec are using in the call processing. 1. Cisco Unified Serviceability - configuration - publisher - CM services -cisco callmanager - Trace on En...

Resolved! HELP WITH QOS ON DMVPN/SIP VOICE GATEWAY

I have a router acting as a DMVPN HUB & Voice gateway Router that is connecting to my ISP for MPLS & SIP service over the same interface.I have QoS policy-map named POLICY that is applied to the physical interface facing the ISP. Now I want to apply ...

Resolved! IM and Presence Certificate Confusion

Hello all, I'm beginning the process integrating an IM&P cluster into my main 11.5 CUCM cluster. I'm at the point where I need to get CA signed certificates and wanted to maybe clear up a little confusion I'm having. When I go to generate a Multi-S...

Resolved! CME 4.2.0 running on 3825 router

Dear All, I have CME 4.2.0 running on 3825 router, I know this is a bit old version of CME. I would like to upgrade IOS of this router so to have a latest CME version and I can register 88xx phones. See 'show version' output below and suggest a suita...

Problem IP phone 7861

Hello, I have a cucm version 11.0.1.20000-2 , with ip phone 7861(firmware sip78xx.11-0-1-11) registred in this version. the problem is the ip phone is very slow . I verified their informations ethernet and port , i found That these values are very...

Voice Class Sip Profile Issue in IOS 15.7

Hello, Tech community! I have this interesting issue with SIP Profile and yes I’m new to SIP Profiles I'm trying to learn more about it, any help would be greatly appreciated!!! The task at hand: Attempting to prefix known 3 digit site code to 4 ...

Cisco Mobile 8.0 end of life Alternative to Jabber

Hi, Please could someone recommend me an application to run on an iPhone or Andriod phone or Tablet that could be used instead of Jabber to make telephone calls as I know Cisco Mobile 8.0 is now and of life. Please don't say Jabber! or Webex Team...

ISR4321 Double E1 card different number

My company has a CUCM 11.5, ISR4321 ISR4321 has 2 E1 cards, two E1 different telecommunications companies Can I use the calling number of CUCM or ISR4321,Separate to different E1 dial out. EX: 1001 call out 222510628，1001 to E1-1 Port 1002 call out 2...

CUCM 10.5 single FXO device

Hello! We are looking for an FXO adaptor to terminate a single POTS line at a remote site. We are not looking for an FXO card sitting inside an ISR serving as a gateway, but rather a stand-alone adaptor that will integrate with CUCM 10.5. Hoping ...

IMP 10.5.2 integration wtih exchange 2016

hi Guys, trying to integrate imp 10.5.2 with exchange 2016 for calendaring status. this IMP is already installed and working for everything else. just the calendar "in a meeting" is not showing. they also use it on adroid/iPhone so this integrati...

Unified Communications Infrastructure

Forum Posts

Resolved! CUCM 11.5 Call Pickup issues

Resolved! CUCM License Migration from 9.x to 12.x

Resolved! Unity Connection extension in use

IP Address change process and Impact

CIMC IP from vSphere

Collect CUCM trace file about media resource allocated

Resolved! HELP WITH QOS ON DMVPN/SIP VOICE GATEWAY

Resolved! IM and Presence Certificate Confusion

Resolved! CME 4.2.0 running on 3825 router

Problem IP phone 7861

Voice Class Sip Profile Issue in IOS 15.7

Cisco Mobile 8.0 end of life Alternative to Jabber

ISR4321 Double E1 card different number

CUCM 10.5 single FXO device

IMP 10.5.2 integration wtih exchange 2016

Cisco UCS M5 and CSSM compability /lifecycle in future ALMA releases

Jabber cached credentials

Subject: Looking for Experts on Automated Scheduled Call Forwarding in

Cube in direct routing configuration, adjusting revocation-check

Switching to fix the VAPT issue

On Premise Smart License Satellite GUI Certificate Renew

Prime Collab Deploy Certificate

VG350 IOS Upgrade

Cisco CUCM Hyper-V

how jabber only chat use ?