Unified Communications Infrastructure

Jabber Text not displaying in window

Hi Everyone I have a user who is trying to use Jabber but when she types a message in the box and it's sent she doesn't see anything nor can she see when the other person responds. I've never seen this before and I wanted to see if anyone has encount...

Jabber - IM & Presence - cisco synch agent service stopping automatically

Hi, I am facing many issues in presence server after deployment. All error are attached. - dbreplication problem - Cisco sync agent service stops automatically on IMP node1 within 10 minutes after i manually start - Many services are stuck in "Sta...

UAC Advanced Direct Transfers

We're having an issue after updating to the newest UAC Advanced version where transferred calls are not showing the way we would like. We want to turn Direct Transfers on based on the instructions in the troubleshooting document, page 35 (section 4-...

CUCM 11.5 7941 firmware upload issue

We have migrated a customer from CME to CUCM. The existing firmware on the phones is SCP41.8-04SR2 and default for CUCM is SCCP41.9-4-2SR2-2S. I am attempting to upgrade the phones to 8.5(2) to allow the upgrade to default on CUCM. I have attempt...

Expressway is refusing admin/other connections

Hi everyone, I have vMotioned an Expressway to a new host and restarted it - now although I can ping it, it is refusing HTTPS and SSH (and other connections). I can access the console via vCenter and I can login to the CLI. by the way, i have check...

Resolved! Any way to take a Users report where I can check the permission groups associated to them?

Hi A need to check which groups have the users associated to. But I don't find any way to do it in Bulk Administrator. Is that possible? Thank you for the help Best Regards

MWI not working for SIP phones

Hi All, I have 8811 SIP phones for which I have configured voicemail features. SIP phones MWI light is not working even though my extensions are getting messages. Any specific configuration require for SIP phones. voice register global mode cme ...

Resolved! Adding a Cisco 2901 to CUCM

Hello All, I have a Cisco 2901 which I have added to CUCM via the gateway section, using a MAC address off of one its live networked ports. In my Cisco 2901 I have an FXS card which I have also added to call manager, with a port that I have attached...

SIP URI Dialling

Dear Cisco Team, Do you have any screenshots on how the SIP URI dialing would look like to customers? how it works for the customer's eye? I appreciate it, Thanks,ALi

CUC Cluster

does anyone can help with answer in how many CUC ver 11.5 Subs can we add in one cluster. i thought it is like cucm " Max 8 subs" in a cluster but i am coming cross some articles that says only one cuc sub can be added to the CUC cluster.

Help with CME and incoming sip calls.

I have CME setup on SIP and out bound works good. The thing is I have it setup behind a home router on privet IP address. When the calls come is it hits the CME but it hits it with a public ip address. SIP/2.0 400 Bad Request - 'Invalid Host' To: <s...

Jabber user cannot search contacts

I have a jabber user that cannot search contacts. If she enters even the first letter of the person's name, the box "no search results found" comes up. Even typing in their full email address results in nothing. She is an LDAP synchronized user, ...

MIC to LSC Certificate Migration

I've been tasked to convert our phone certs from MIC to LSC as part of our NAC project. Currently we are whitelisting a lot of phones which defeats the whole purpose of the project. I've read through Cisco documentations found online and shared wi...

VM Host not responding in UCS Server

Hi, we have cucm 8.6 cluster hosted on two UCS C-200 M2 servers, until last month it was working fine but from last month we are experiencing Publisher going down , there was one faulty HDD which i replaced with Cisco RMA and got new one, after few ...

Resolved! Collaboration Edge MRA deployment with Certificate questions

Hi All, I've read thru the Unified Communications Mobile and Remote Access via Cisco Expressway and I have a few questions on installing certificates. Currently we have one Expressway C internally and Expressway E in our DMZ. My questions are and ple...

Unified Communications Infrastructure

Forum Posts

Jabber Text not displaying in window

Jabber - IM & Presence - cisco synch agent service stopping automatically

UAC Advanced Direct Transfers

CUCM 11.5 7941 firmware upload issue

Expressway is refusing admin/other connections

Resolved! Any way to take a Users report where I can check the permission groups associated to them?

MWI not working for SIP phones

Resolved! Adding a Cisco 2901 to CUCM

SIP URI Dialling

CUC Cluster

Help with CME and incoming sip calls.

Jabber user cannot search contacts

MIC to LSC Certificate Migration

VM Host not responding in UCS Server

Resolved! Collaboration Edge MRA deployment with Certificate questions

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Multi-tenant Cisco Call Manager , IM Presence

Jabber Persistent chat Hidden users

CUCM Smart Licensing offline error

CUCM Alert LowActivePartitionAvailableDiskSpace

vm creation showing error

Cisco CallManager Call Queues

CUCM 14 backup

Changing Domain on CUCU, Unity, IM&P and Expressways C/E

Cisco ATA 191 unregistered

CICM V10.5