Good day!!
One question I have one CUCM version 10.5 with expressway C and E Version: X8.7.2, I try configure this guide
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/Mobile-Remote-Access-via-Expressway-Deployme...
Hi
i had cisco attendant console advanced 10.5 (with demo license) integrated with CUCM 10.5
i get license from cisco but for version 11 so i upgraded CUACAC with conserving database configuration
the problem is when operator transfer a call to an ...
Ok, i'm resurrecting a dead thread topic from 2012 because it appears to be an issue with our current install on 9.1.2CUCM 9.1.2.10000-289971 running FW sip9971.9-4-1-9 upgraded from sip9971.9-3-2SR1-1I'm looking to disable the ABC/123 button and sti...
Hi,
I have a question from a end user who is thinking of migrating their existing telephony from CME to a BE4000 and moving from Primary rate ISDN to a SIP trunk to the PSTN:
Is it possible to configure two public IP addresses on the BE4000 ? It ...
Hi,
I've searched high and low and I can't seem to find a way to export a list of extensions/lines with the associated Call Search Space Permissions applied.
The Export Phones report only includes extensions that are assigned to a device. What I...
hi all,
i deployed cms 2.2.9 and cucm 11.5, call between endpoint registered cucm and cms use unsecure trunk. i enable allow ix in sip profile of cucm, also enable active control, but when call endpoint the active control doesn't show up. the status ...
Hi Guys,
We have CUCM 8.6.2.20000-2 version installed on MCS 7835I3 server and we want to migrate to BE7K server i.e UCS-240 M4.
Is below procedure correct for MCS to UCS Migration.
1. Install CUCM 8.6.2.20000-2 on UCS Server with the same IP ...
I currently have a client with approximately 100 machines. Not all of these machines are need the Cisco IP Communicator 8.6.6.0 on their computer. A large majority of the users are on Dell Optiplex 7040, i7, 16GB Ram, 4GB Dedicated Graphics Car...
Hi,We have a client using Cisco Unified CM Administration. The client reports that he used to be able to dial a feature code ##, then the extension number they want to transfer to, and this would go directly to voicemail injstead of ringing. Since th...
Hi Guys,How can I play a "your call is being recorded" announcement on incoming calls?It is only for a small number of extensions (40)The gateways are MGCP (I used a TCL script before to do this on a H323 gateway but changing to H323 is not an option...
Hi,I want to upgrade my CUCM ver 9 to Ver 10.5 and i have licenses installed in it , so i need to know the following1- steps of upgrade process2- Did i need to buy new licenses for ver 10.x ? or only upgrade my licenses ver 9 to ver 10 free ?3- I bo...
Confused by the 11.5 and later SSL certificate requirements. Don't understand what the below means:
Make sure you import a PKCS12 (.pfx or .p12) format signed certificate.
The certificate must contain primecollab alias.
The Key password for primeco...
Hi everyone,
I have a few questions on what the best way to update a CUCM Cluster is.
The cluster is running 10.5.2.12901-1, and i plan to upgrade it to the latest 10.5.2 version (currrently 10.5.2.16901-1). I would also like to install the latest ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
