Does anyone know how I can take the following syslog alert and have it notify me? CiscoSystemInOverage System is in overage which means licensed resource limit has been exceeded on the system (WARNING_ALARM) Upload additional licenses. Verify tha...
Does anyone know how I can take the following syslog alert and have it notify me? CiscoSystemInOverage System is in overage which means licensed resource limit has been exceeded on the system (WARNING_ALARM) Upload additional licenses. Verify tha...
We had a subscriber that failed so we will be doing a fresh install on new hardware and attaching it to the PUB. All of our phones are currently registered to the PUB. My question is will there be a service interruption when we connect the SUB to t...
Good day Sir/Madam In Cisco Unified CM Administration where do I configure to divert all calls to a cellphone number and set the phone of the person dialing from cisco work phone prompt for a call out pin before the call is succesful. Regards ...
Good day Sir/Madadm How can I setup a voicemail on CP 6941 Cisco phone Regards CHUMA MABINDLA
Our issue is that Attendant Console does not seem to honor the Always Use Prime Line setting. We are running CUACS version 11.0.3 on CUCM version 11.5(1)SU3b. The associated phone is an older 7961 with two lines: Line 1 is the receptionist main lin...
Hi, all! I have IPMA configured but the customer wants to login the assistant on the phone and don't want to use the IPMA Assistant console. I know that we can create a service for that but don't find docs to show my how (http syntax)? I'm using CU...
Good day Sir / Madam In Cisco Unified CM Administration where can i delete the automated cisco voicemail, because the problem now we are facing is that 30% of the staff have left the institution and those phone still have their voicemail Regards ...
iF the customer have BE6000M or BE6000H only how many concurrent Video i can make ?
Hi For an example, say we have a Cisco 8851 configured with 5+ lines, in some cases we can have upto 10. Is there a way to set all lines on a single device to be a member of the same pickup group ? You can imagine how tedious one by one becomes whe...
I am running into an issue with after-hours calls to a call pickup group. Currently, the call pickup group is set to transfer no answer calls to 8000 our main voicemail line. During the day this works fine since 8000 is transferred to our operators...
I understand that there is a limited number of stored call logs. what I'm wondering is say for a medium/ large organisation with around 300 phones, can the telco company keep a record of internal calls? Thanks
How to backup Cisco configuration into a Text File without interrupting the Switch or LAN
Hello everyone, We are deploying a BE6000S for our office (less than 30 users), and currently we are using internet service provider router as our DNS, and don't have access to make changes. Would deploying the BE6000S without a pro...
we have cme 11.5 on ISR 4321 ip phones : 3905 ,8841 and 8861 when dialing any IVR then try to choose any option then nothing happen also if try to enter the extension , appreciate your advice attached show run and debug calling number : 224 calle...
Hi One of my customer having 2 gateways (A & B) at single site with different PRI provider. Some users having extension from provider A and other having extension from provider B. Route Group contains gateway A & B as below A B Since requirement is...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-03-2024 05:46 PM | ||
10-03-2024 09:27 AM | ||
10-02-2024 10:53 AM | ||
10-01-2024 12:30 AM | ||
09-30-2024 01:22 PM |
User | Count |
---|---|
3 | |
2 | |
2 | |
1 | |
1 |