Hi All,
I have 8811 SIP phones for which I have configured voicemail features. SIP phones MWI light is not working even though my extensions are getting messages.
Any specific configuration require for SIP phones.
voice register global mode cme ...
Hello All,
I have a Cisco 2901 which I have added to CUCM via the gateway section, using a MAC address off of one its live networked ports.
In my Cisco 2901 I have an FXS card which I have also added to call manager, with a port that I have attached...
Dear Cisco Team,
Do you have any screenshots on how the SIP URI dialing would look like to customers? how it works for the customer's eye?
I appreciate it,
Thanks,ALi
does anyone can help with answer in how many CUC ver 11.5 Subs can we add in one cluster. i thought it is like cucm " Max 8 subs" in a cluster but i am coming cross some articles that says only one cuc sub can be added to the CUC cluster.
I have CME setup on SIP and out bound works good. The thing is I have it setup behind a home router on privet IP address. When the calls come is it hits the CME but it hits it with a public ip address.
SIP/2.0 400 Bad Request - 'Invalid Host'
To: <s...
I have a jabber user that cannot search contacts. If she enters even the first letter of the person's name, the box "no search results found" comes up. Even typing in their full email address results in nothing. She is an LDAP synchronized user, ...
I've been tasked to convert our phone certs from MIC to LSC as part of our NAC project. Currently we are whitelisting a lot of phones which defeats the whole purpose of the project. I've read through Cisco documentations found online and shared wi...
Hi,
we have cucm 8.6 cluster hosted on two UCS C-200 M2 servers, until last month it was working fine but from last month we are experiencing Publisher going down , there was one faulty HDD which i replaced with Cisco RMA and got new one, after few ...
Hi All, I've read thru the Unified Communications Mobile and Remote Access via Cisco Expressway and I have a few questions on installing certificates. Currently we have one Expressway C internally and Expressway E in our DMZ. My questions are and ple...
CUCM Version 9.1.2
Call Flow: PRI - MGCP GW - CUCM - CUCM SIP TRUNK - IVRS - CUCM SIP TRUNK - CUCM - CCX
Calls via CUCM to CCX work just fine. But calls that go through the IVRS over to UCCX when agent answers anytime they try to hold or transfer th...
All,
I need to determine if there is a configurable parameter that allows you to point to a specific ringlist on CUCM 10.5 for a specific phone model? Or if ringlist is not a configurable parameter what is the exact file name that a phone looks up fo...
Dear Cisco Community,
Can anyone confirm if RTMT 10.5 supports TLS v1.2 encryption for all emails bound for the configured Mail Server? The concern is that emails are being sent from internal monitoring systems unencrypted.
I cant find any documen...
Hi
I have a cluster of 3 CUCM servers. Using Cisco LCU utility, I can connect to 2 subscriber nodes, but when I try to connect to Publisher node, I get an error message - Server Unreachable - "The connection timed out while trying to reach the Cisco...
We are trying to migrate a cluster of CUCM 8.0.3.20000-2 running on two MCS servers to 11.5 on new cisco servers running vmware.We discovered the cluster and the ESXi servers and created a migration task.
After we start it it runs for some time and t...
Hi Experts,
I would like to know how to perform Media Sense upgrade from 10.5 to 11.5, is there any document available. Our Media sense integrated with CUCM and UCCX system.
Also what pre-requistes should be consider/planned for performing this upg...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
