Good Day,
We currently have Cucm 9.1 installed and will be adding a few remote phones. What is the best way to provide location services to these phones for E911 purposes? Is there something built in to do this or another module ?
Thanks
When Attempt to Dial an extestion on same call manager, it dials successfully but when try to press cancel call it displayed
"xml error [4] parse error"
A java class creates XML to Push on Phone
"<?xml version="1.0" encoding="utf-8"?><CiscoIPPhoneRe...
Hello all,
I know this topic has been beat to death but I need a sanity check. Here is my configuration:
CUBE SIP trunk 01 1st choice in RL
CUBE SIP trunk 02 2nd choice in RL
MGCP PRIs 3rd choice in RL
When a user places a call to the PSTN on SI...
I am trying to modify internal DN presentation using a fairly well documented process with different partitions and CSS's, and all that is working great at the moment. The hitch I ran into is that we have 2-digit endpoints for a few critical services...
I have a user with extension 1234 who occasionally forwards their phone to extension 5678 (shared workspace phone) which does not have voice mail. When someone calls 1234, extension 5678 rings continuously (as expected). Is there a way to have the ...
Greetings,
How can I set up the following:
Internal call to internal #9999 -> redirect to external +7 7272 009999 Call cost at our expence
External call to internal #9999 -> redirect to external +7 7272 009999 Call cost at caller A's expence
Hi guys . We have integrated Tshark into our UNIGY server (linux) so it will send, by using script, captured packets to our remote computers running wireshark. Is it possible to run same Tshark on CUCM server (it's red hat linux too) and send c...
Hi guys. I remember I was able to see which Sub in cluster is active before, now I can't find it how I did it :) . Can you please advice/remind it ? Also How can i see (alert/log) when there was fail over from SUB1 to SUB2 ? (We had a sip trunk is...
Recently we migrated the customer from 8.5 CUCM to 10.5 CUCM. After the migration we are observing that the caller id is not being displayed when the call comes from pstn >> to IP phone >> and picked via call pickup group.
Configuration wise it see...
Hello to all!
I found a problem with Cisco Unity (version 11). I`ve created a call handler and trying to upload greeting (.wav file). I`m trying to upload file by play/record button at standard greeting edit page. After choosing the file I can play ...
Dear Support,
please advise, need to implement the follwoing
whenever the call comes to huntpilot > greeting needs to play > which says press1 for ..., 2 dor ....,
if the user presses 1 then go to ext 111, but should play a greeting until the 111 pic...
Hello All,
Hope you all are well!
I guess I'm putting this query in the right queue under "Unified Communication Applications". Here's my query:
When I try to export files for CISCO 7942 phones via BAT I see 73 7942 phones however, when I check/cou...
Hi Support Community
We are upgrading our voice environment from 8.6 to 11.0 including CUCM, CUPS, CUC and UCCX including moving from MCS servers to Cisco UCS. In regards to CUCM, UCCX and CUC I have completed these many times in the past and we hav...
Hi Experts,
We have cisco IPT infrastructure in place as below and need to upgrade to 11.X
CM : Active Version: 9.1.2.13900-10 Unrestricted
CUC : Version 9.1.2.10000-10
IMP : 9.1.1.31900-1
UCCX : System version: 9.0.2.10000-71
ELM :
PCD : 9.5
I n...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
