Unified Communications Infrastructure

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Hello, We have CUCM 10.5.We want to add in CUCM multiple forest (we have multiple company with different domain name) using LDAP authentification so all the user/password sync with CUCM.We have as distinguished name CN=xxxx,CN=Users,DC=xxx,DC=local a...

Hi....... Dear friends,I am facing a problem with Content sharing Issue with Polycom Bridge on Multiparty call. point to point call content sharing is working fine.we had checked all setting on device, software update was also done but problem not re...

So, background is current phones on firmware 4.2.1 (79xx's) on CUCM ver 8.6 - this came as part of a device package I installed.Desire: Upgrade to CUCM ver. 10.5 and end up on the same phone firmware.Background: Using PCD for the upgrade from 8.6 to ...

Mary Manly by Beginner
  • 4647 Views
  • 3 replies
  • 0 Helpful votes

So here is the current environment:CUCM Version 7.5 on MCS hardware, one PUB and 2 SUBS.Unity Version 5 on MCS hardware!  Windows based!UCCX Version 8.0 with two servers.2 MGCP PRI Gateways about 100 usersGoal - Move to UC hardware, VMware and Versio...

Hi, I am facing an issue when I make a call from jabber in softphone mode to another jabber client my call fails and using wireshark traces I see SIP2.0 503 Service Unavailable.I have followed the guide and was able to deploy it once before successfu...