Unified Communications Infrastructure

In CUCM 10.5.2 cisco telepresence 1300-65 and 3200 register OKwhen end to end call only voice no video Thanks

Hello,  I am looking for help with a custom auto attendant script.    Cisco 2900 (15.4)CME  10.5CUE 8.6.9All internal user extensions are 3 digits starting with 1Prompt Management ext is set to 505Auto Attendant number is set to 555 We are looking to...

Hi Folks,So I'm running a 2851ISR with 12.4(15)T14/CME4.1(0)/CUE 7.0.6  I've changed all references to a MOH file (OnHold1 to OnHold2).  I've made this change under the System Parameters, in the Service Engine, and Telephony Service.  Then I deleted ...

We have 2 separate clusters. Users can call from cluster to cluster via trunks.All of our auto attendants are on one unity connections (10.x) but we can dial by extension by using call handlers to match all extensions on the other unity connections (...

Hi all,i'm looking for documentation about interoperability between multiple CUCM cluster, a Cisco Lync Gateway and a MSLync server.At site A we have a CUCM_A cluster, one Cisco Expressway-C B2BUA and one MSLync within the same SIP domain, let's name...

Dear All, When doing Jabber screen sharing, can we only share a specific file or application instead of whole desktop? best regards,Naveen 

Hi Everyone,I have a C220M3BE which come preloaded with ESXi 5.0.I've come to notice that every 10-12hours the VM Host would reload/reboot.When I login to vSphere and check the Event Tab, I see a lot of firewall rule changes, and then I see 'Host Boo...

I need to find a table some place that shows the total number of SIP Sessions supported by each of the ISR G2 models.Specifically, I am looking for info such as:a 2901 can support 30 sessionsa 2921 can support 75 sessionsetc.Thanks in Advance!Also, i...

Ho Experts, Can I configure SSH2 or telnet inside CUCM 8.6, and also is there any configuration like in routers (enable password *******)? Thanks for all Mohammad Saeed

Hi,I've been asked to implement a inbound call greeting when external clients dial our organisation. We are using CUCM 7.1.Right now calls come inbound and hit the reception phone (octo-line) which forwards to a ephone-hunt group after 20 seconds. It...