Hello, I am trying to install CUE on AIM cisco 3825. I did the initial configuration and when the device is reloading its stuck .. may its trying to reach my DNS server as I have given my dns details in initial setup. Please let me know how can ...
I would like to know why, in the integration docs for SCCP/Unity Connection (version 9...I think all versions have this "caution" though) there is a note that, when configuring your line group for the voicemail directory numbers they must be in a num...
HiI have the following setup:CUCM 9.1.2Unity Connection 9.1.2IM&P 9.1.1CPC-P 10.0So far I was able to sync CUCM with CPC-P, but still cannot sync Unity Conn and IM&P does someone has the configuration steps for these two products?FYI, I followed this...
Are there any plans for CUPS to support SAN (Subject Alternative Names) Certificates? We have lost the ability to incorporate meeting availability with presence, due to this issue.Thanks,Doug
Hi Friends,I have issue with the cisco 8941 phone login. One of the remote site who connected to the main site with MPLS line. The phone in remote site is getting error when they login. The user is getting DNS querry fail.I have attached the log file...
Hi,I´m trying to regenerate a certificate for Cisco 7911 in a CUCM secure cluster, but after a few minutes the status is:Certificate Operation Status: Operation Pending Note: Security Profile Contains Addition CAPF Settings. This phone has ...
Dear guysI have a strange issue in my router. Here is the call setup:PSTN------SIP trunk-------cube router--------H.323--------CUCMmy issue is there is a message in my router logs which is as follow:Dec 30 10:11:16.797 KSA: %SIP-3-UNSUPPORTED: Unsupp...
Why would calls answer to speaker if the headset is picked up to take the call? So when a user receives a call, the user picks up the handset but the call is answered on the speaker phone? Auto Answer is not on. What could cause this?
hi ,We have cluster setup of CUCM 9.1 and UCCX 9.0 , Exsi 5.1 host consists cucm pub and uccx sub and other server consists cucm sub and uccx pub. Some days back cucm pub and uccx sub server got hang.Problem was resolved after hard reboot of the se...
Dear all,I have Unity Connection 9.x as auto attendant. The Unity Conn is not integrated with CUCM for user synchronization. Before i changed extension number from 3 digit length to 4 digit length, it was working fine. I've updated the extension numb...
Hello Everybodyactually i want to use CUC on my network for Vocie Mail and IVR systemi just want to know that how can i calculate the licesne which i need to purchase and which part Number, i have 10 fxo port to PSTN and 50 Users who should have VMBe...
HelooWhen i call to the ip phone with DID from external phone it rings both on the desk phone and remote phone but it doesn’t connect when it is picked from the remot phone and it continues ringing on the desk phone. While it works for calls that are...
I want to know how to block calls based on ANI for individual user in CUCM? Lets say if the individual wants to block calls from certain number.Malicious call id - softkey will not work for our purpose.calls come to cucm via mgcp gateway. cucm 9.xt...
