Call Manager and OCS

[serdarb]

Hello,

I have Call Manager 7 and Microsoft OCS.

Both of them work properly.

There are 1xx DNs on CM adn 5xx DNs on OCS.

Everyone have one CM number and one OCS number.

I want to do that:

When i called 1xy, both ocs (5xy) and cm (1xy) numbers must ring.

Is it possible? And how?

[Craig Dyer]

Good Afternoon,

     I would use the Single Number Reach feature, when the Cisco phone starts ringing a second call starts(after a delay configure by you) passes a call to in most circumstances your mobile but your OCS would work.

     Have a look at this document on how to configure this feature:- http://www.cisco.com/en/US/docs/voice_ip_comm/hucs/7.1a/provision/CH13_HUCS.html

Hope this helps,

Craig

(PLEASE RATE HELPFUL POSTS)