cdr

[bluesea2010]

Hi,

If I want to enable CDR apart from the          Under System -> Service Parameters , Is there anything else to do ?

cause sometims the cdr does not show all records.

If I have two servers  (both are active  publisher subscriber ) , do we need to enable for both ?

Is there separate parameters for each device registred in the call manager

for example I don't need CDR for certain devices or lines

is it possible

thanks

[Jaime Valencia · Accepted solution]

CDR has to be enabled PER SERVER

and no, CDR will log ALL calls, this is an all or nothing switch.

[bluesea2010]

Hi,

Thanks for the reply ,

What is the maximum calls can be logged for an extension ?

How to record calls simultaneously to other server  and what server required 

Thanks

[Jaime Valencia]

There is no maximum, but records can only be stored for up to 6 months, or until you fill the DB and records overwrite.

I don't understand your 2nd question, have you reviewed the CDR/CAR documentation???

[bluesea2010]

Hi,

I jsut want upload to cdr records to a syslog server from the cucm ,

Is it possible ?

Thanks

[Jaime Valencia]

No, but you can use a billing server for that purpose. You'll need to set a SFTP server to receive the flat files.