12-13-2018 11:04 PM
Hello Cisco team,
I am looking to install Cisco Unified call manager in 3 customer location.Each Site is individual deployment only.i need Cisco 8851,7821,CP3905 IP phones registration in Cisco Unified call manager.I have Cisco ISR4321 Router as voice gateway with a PRI connection in it.I also Have Cisco VG350 Voice gateway to connect Analog Phones..
Some who is expert please help me with Documents for installation,Configuration examples,Videos regarding these setup..
My Scope of work
1.Install Cisco Unified call manager in Customer hardware and basic setup to be completed
2.Register phones in Cisco Unified call manager.
3.Configure ISR4321 as gateway and PRI connection should be configured,Add Voice gateway in Cisco Unified call manager.
4.VG350 Gateway need to be add in Cisco Unified call manager,Analog phones need to be registered,FXO port in VG350 configuration.
5.Cisco Unified call manager primary gateway as ISR4321(Pri Connection) and Secondary gateway as VG350 (FXO Connection).
someone kindly assist me
Solved! Go to Solution.
12-14-2018 06:38 AM
All the CUCM documentation is here:
And you can google how to for a lot of things and found references.
Given that it seems you have never done this, I would strongly advise to hire a reputable consultant or reach out to a Cisco partner with UC specializations to get assistance with this. Building a CUCM environment requires of previous knowledge on how to design and configure it.
12-20-2018 06:14 AM
Already did, the documents that cover all that, are in the link I provided. That would be the official Cisco documentation.
Additionally, if you do not understand call routing in CUCM, you would need to read the dial plan chapter from the SRND to understand how to design a dial plan for your organization.
12-14-2018 06:38 AM
All the CUCM documentation is here:
And you can google how to for a lot of things and found references.
Given that it seems you have never done this, I would strongly advise to hire a reputable consultant or reach out to a Cisco partner with UC specializations to get assistance with this. Building a CUCM environment requires of previous knowledge on how to design and configure it.
12-19-2018 09:25 PM - edited 12-19-2018 09:26 PM
Tahnks for reply..
Can you refer me Cisco CUCM basic installation Configuration example which genarally use.So that i can test in lab envoirnment.
1.install CUCM in ESXi
2.Basic setup for phones registration and basic call features
i have search many doc,But i am not pretty sure which one to follow..
kindly help me on this
12-20-2018 06:14 AM
Already did, the documents that cover all that, are in the link I provided. That would be the official Cisco documentation.
Additionally, if you do not understand call routing in CUCM, you would need to read the dial plan chapter from the SRND to understand how to design a dial plan for your organization.
12-23-2018 06:00 AM
Hello Jaime,
Thanks for the information..
Please look on My BOM,In my Solution there is no BE6M-M5-K9...How can i deploy CUCM in seprate hardware.
Where can i download the file to install CUCM..
25.0 | R-UCL-UCM-LIC-K9 | Top Level SKU For 9.x/10.x User License - eDelivery |
25.0.1 | CON-ECMU-RUCLUCK9 | SWSS UPGRADES Top Level SKU For 9. |
25.1 | CUCM-VERS-12.0 | CUCM Software version 12.0 |
25.2 | LIC-CUCM-12X-ESS | UC Manager-12.x Essential User License |
25.2.0.1 | CON-ECMU-LICC1CMS | SWSS UPGRADES UC Manager-12.x Essential User License |
25.3 | LIC-EXP-TURN | Enable TURN Relay Option |
25.4 | LIC-EXP-E-PAK | Expressway Series, Expressway-E PAK |
25.5 | LIC-UCM-12X-ESS | UC Manager Essential 12.x License |
25.6 | EXPWY-VE-C-K9 | Cisco Expressway-C Server, Virtual Edition |
25.7 | LIC-EXP-E | Enable Expressway-E Feature Set |
25.8 | LIC-EXP-GW | Enable GW Feature (H323-SIP) |
25.9 | SW-EXP-8.X-K9 | Software Image for Expressway with Encryption, Version X8 |
25.1 | LIC-EXP-AN | Enable Advanced Networking Option |
25.11 | EXPWY-VE-E-K9 | Cisco Expressway-E Server, Virtual Edition |
25.12 | LIC-EXP-DSK | Expressway Desktop Endpoint License |
25.13 | LIC-SW-EXP-K9 | License Key Software Encrypted |
25.14 | LIC-EXP-SERIES | Enable Expressway Series Feature Set |
25.15 | LIC-CUCM-12X-ENH | UC Manager-12.x Enhanced Single User License |
25.15.0.1 | CON-ECMU-LICCUCHM | SWSS UPGRADES UC Manager-12.x Enhanced Single User Lic |
25.16 | LIC-UCM-12X-ENH | UC Manager Enhanced 12.x License |
26.0 | VG350-96FXSE-EM/K9 | Cisco VG350 96 FXS OPX-Lite Bundle |
26.0.1 | CON-SNT-VG3509K9 | SNTC-8X5XNBD Cisco VG350 96 FXS O |
26.1 | CAB-ACSA | AC Power Cord (South Africa), C13, BS 546, 1.8m |
26.2 | SL-VG350-UC-K9 | Cisco VG350 Unified Communications License |
26.3 | MEM-CF-256MB | 256MB Compact Flash for Cisco 1900, 2900, 3900 ISR |
26.4 | VG350-FANASSY | Cisco VG350 Fan Assembly |
26.5 | PVDM3-256 | 256-channel high-density voice DSP module |
26.6 | HWIC-BLANK | Blank faceplate for HWIC slot on Cisco ISR |
26.7 | RPS-COVER-3900 | Cover for empty 2nd Power Supply slot on Cisco 3925/3945 |
26.8 | VG350-SPE150/K9 | Cisco VG350 Motherboard |
26.9 | MEM-3900-1GB-DEF | 1GB DRAM (512MB+512MB) for Cisco 3925/3945 ISR (Default) |
26.1 | SL-VG350-IPB-K9 | Cisco VG350 IP Base License |
26.11 | PWR-3900-AC | Cisco 3925/3945 AC Power Supply |
26.12 | SVG350UK9-15204M | Cisco VG350 Series IOS UNIVERSAL |
26.13 | SM-D-48FXS-E | Cisco 48 Port FXS OPX-Lite Double Wide Service Module |
26.14 | VIC2-4FXO | Four-port Voice Interface Card - FXO (Universal) |
27.0 | ISR4321-V/K9 | Cisco ISR 4321 Bundle, w/UC License, CUBE-10 |
27.0.1 | CON-SNT-ISR4321V | SNTC-8X5XNBD Cisco ISR 4321 UC Bundle, PVDM4-32, UC L |
27.1 | SL-4320-IPB-K9 | IP Base License for Cisco ISR 4320 Series |
27.2 | SL-4320-UC-K9 | Unified Communication License for Cisco ISR 4320 Series |
27.3 | PWR-4320-AC | AC Power Supply for Cisco ISR 4320 |
27.4 | CAB-AC-C5-IND | AC Power Cord, Type C5, India |
27.5 | MEM-FLSH-4G | 4G Flash Memory for Cisco ISR 4300 (Soldered on motherboard) |
27.6 | MEM-4320-4G | 4G DRAM for Cisco ISR 4320 (Soldered on motherboard) |
27.7 | FL-CUBEE-5 | Unified Border Element Enterprise License - 5 sessions |
27.8 | SISR4300UK9-316S | Cisco ISR 4300 Series IOS XE Universal |
27.9 | NIM-BLANK | Blank faceplate for NIM slot on Cisco ISR 4400 |
27.1 | NIM-1MFT-T1/E1 | 1 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module |
27.11 | PVDM4-32 | 32-channel DSP module |
27.12 | FL-CUBEE-25 | Unified Border Element Enterprise License - 25 sessions |
28.0 | FL-CUBEE-5= | Unified Border Element Enterprise RTU license - 5 sessions |
29.0 | CP-3905= | Cisco Unified SIP Phone 3905, Charcoal, Standard Handset |
29.0.1 | CON-SNT-CP3905 | SNTC-8X5XNBD Cisco Unified SIP Phone 3905, Charcoal, |
30.0 | CP-3905-PWR-IN= | Power Adapter for Cisco Unified SIP Phone 3905, India |
31.0 | CP-8851-K9= | Cisco IP Phone 8851 |
31.0.1 | CON-SNT-CP8851K9 | SNTC-8X5XNBD Cisco UC Phone 8851 |
32.0 | CP-BEKEM= | Cisco IP Phone 8800 Key Expansion Module |
32.0.1 | CON-SNT-CPBEKEM | SNTC-8X5XNBD Cisco IP Phone 8800 Key Expansion Module |
33.0 | CP-PWR-CUBE-4= | IP Phone power transformer for the 89/9900 phone series |
34.0 | CP-PWR-CORD-IN= |
Power Cord, India
|
12-25-2018 06:28 PM
You order the bootable media via PUT and the UC virtualization wiki contains all the guidelines for using 3rd party HW, you would need to validate your server with those to determine if it's compatible or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide