cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
116
Views
0
Helpful
0
Replies

Cisco-CUCM14.0 sending Video port 0 and audio port present & recvonly

kaftab001
Level 1
Level 1

1st INVITEW from User-Agent: Cisco-CUCM14.0:
++++++++++++++++++++++++++++++++++++++++
Is it correct to send below param in SDP by Cisco-CUCM??

Video port 0

m=video 0 RTP/AVP 126 97 111

Audio port present but mode = recvonly
m=audio 24624 RTP/AVP 8 0 101
a=recvonly

Proxy is sending INVITE to next hop changing audio port to 0 and sending both m lines with both video and audio port 0

That is causing issue in the next Hop and sending 480 Temporarily Unavailable - claimg that against RFC 3264


Supported: 100rel,timer,resource-priority,replaces
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Min-SE: 90
User-Agent: Cisco-CUCM14.0
Allow-Events: presence, kpml
Session-Expires: 300; refresher=uac
Content-Type: application/sdp
Content-Length: 1109

v=0
o=CiscoSystemsCCM-SIP 69032147 1 IN IP4 1.5.5.11
s=SIP Call
c=IN IP4 1.5.5.11
b=TIAS:1408000
b=AS:1408
t=0 0
a=cisco-mari:v1
a=cisco-mari-rate
m=audio 24624 RTP/AVP 8 0 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=extmap:14/sendrecv http://protocols.cisco.com/timestamp#100us
a=ptime:20
m=video 0 RTP/AVP 126 97 111
b=TIAS:1344000
a=label:11
a=extmap:14/sendrecv http://protocols.cisco.com/timestamp#100us
a=rtpmap:126 H264/90000
a=fmtp:126 profile-level-id=42801F;packetization-mode=1;max-mbps=244800;max-fs=8161;max-rcmd-nalu-size=32000;level-asymmetry-allowed=1
a=imageattr:126 recv [x=[32:1:1920],y=[18:1:1080],par=1.7778,q=1.00]
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=42801F;packetization-mode=0;max-mbps=244800;max-fs=8161;level-asymmetry-allowed=1
a=imageattr:97 recv [x=[32:1:1920],y=[18:1:1080],par=1.7778,q=1.00]
a=rtpmap:111 X-ULPFECUC/90000
a=fmtp:111 max_esel=1420;m=8;max_n=32;FEC_ORDER=FEC_SRTP
a=content:main
a=recvonly
a=rtcp-fb:* ccm fir
a=rtcp-fb:* ccm tmmbr
a=rtcp-fb:* nack pli

INVITE from Proxy/B2B to Next Hop:
++++++++++++++++++++++++++++++
Supported: replaces,X-cisco-srtp-fallback,X-cisco-original-called,100rel
User-Agent: Cisco-CUCM14.0
Allow-Events: presence,kpml
Content-Type: application/sdp
Content-Length: 1100

v=0
o=LucentPCSF 2122339326 2122339326 IN IP4 server1.com
s=-
c=IN IP4 1.5.5.11
b=TIAS:1408000
b=AS:1408
t=0 0
a=cisco-mari:v1
a=cisco-mari-rate
m=audio 0 RTP/AVP 8 0 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
a=extmap:14/sendrecv http://protocols.cisco.com/timestamp#100us
m=video 0 RTP/AVP 126 97 111
b=TIAS:1344000
a=rtcp-fb:* ccm fir
a=rtcp-fb:* ccm tmmbr
a=rtcp-fb:* nack pli
a=rtpmap:126 H264/90000
a=fmtp:126 profile-level-id=42801F;packetization-mode=1;max-mbps=244800;max-fs=8161;max-rcmd-nalu-size=32000;level-asymmetry-allowed=1
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=42801F;packetization-mode=0;max-mbps=244800;max-fs=8161;level-asymmetry-allowed=1
a=rtpmap:111 X-ULPFECUC/90000
a=fmtp:111 max_esel=1420;m=8;max_n=32;FEC_ORDER=FEC_SRTP
a=recvonly
a=label:11
a=extmap:14/sendrecv http://protocols.cisco.com/timestamp#100us
a=imageattr:126 recv [x=[32:1:1920],y=[18:1:1080],par=1.7778,q=1.00]
a=imageattr:97 recv [x=[32:1:1920],y=[18:1:1080],par=1.7778,q=1.00]
a=content:main

0 Replies 0