Cisco Unified CM Administration

[kp-tkr2014]

Hi,

How to change Cisco Unified CM Administration "Administrator account Password" from the web 

Thanks

[Nithin Eluvathingal]

For applications user password change

Go to Application User page on CUCM

Select your user and change it .

If it os admin password u can do it from CLI.

To Change OS admin Password

admin> set password user admin

It asks you to enter the old password and new password. Once the system verifies the password, it is changed.

You can go through below link for OS admin, security password reset and recovery.

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/213527-changing-cucm-os-admin-and-security-pass.html

[kp-tkr2014]

Hi,

How about os recovery password ?

Thanks

[Shalid Kurunnan Chalil]

Hi, 

Well written posts are in this support forum itself for the password reset/recovery. Please find the following link which I refer most of the time

https://community.cisco.com/t5/collaboration-voice-and-video/cucm-passwords-and-password-recovery/ta-p/3162863 

to change the OS password, from the CLI issue the command set password user admin. 

Regards, 

[Roger Kallberg]

What do you mean by “OS recovery password”? AFAIK there is no specific user for this. If you where to do a restore of a node from backup you would be using the admin account defined during initial installation of the system.