cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2072
Views
0
Helpful
4
Replies

CME 8.5 Meetme, no conference bridge

Foo Chuan Soon
Level 1
Level 1

Hi All,

The Meetme conference is not working, when show dspfarm, the status is ASSOCIATION IN PROGRESS as below:

router#sh dspfarm all

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1 

Profile Description : 

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP   Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM   Status : UP

Number of Resource Configured : 8

Number of Resource Available : 8

Maximum conference participants : 8

Codec Configuration: num_of_codecs:5

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -   

Running in Cisco Unity Express 8.5.1 and IOS is c3900e-universalk9-mz.SPA.151-4.M1.bin

Dspfarm configuration as below:

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 4

sdspfarm tag 1 POSNFKSA

conference hardware

max-ephones 300

max-dn 500

ip source-address 11.11.11.11 port 2000

timeouts interdigit 3

load 7916-24 B016-1-0-4.loads

load 7911 SCCP11.8-5-2S.loads

load 7975 SCCP75.8-4-1S.loads

time-zone 42

date-format dd-mm-yy

max-conferences 8 gain -6

transfer-system full-consult

secondary-dialtone 9

sccp local GigabitEthernet0/0

sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0

sccp

sccp ccm group 1

bind interface GigabitEthernet0/0

associate profile 1 register POSNFKSA

dspfarm profile 1 conference 

codec g711ulaw

codec g729ar8

codec g729br8

codec g729r8

codec g711alaw

maximum sessions 8

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

voice-card 0

dspfarm

dsp services dspfarm

ephone-dn  190  dual-line

number 1690 no-reg primary

conference meetme

Is there anything that i missing out?

4 Replies 4

Rob Huffman
Hall of Fame
Hall of Fame

Hi there,

There are some good troubleshooting tips in this excellent doc from Tony @ Cisco

https://supportforums.cisco.com/docs/DOC-9464

Cheers!

Rob

PS: one thing I'm curious about is the "version" in

sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0

but that is no option for enter version 8.5

Have you tried leaving the version out of the command and doing a no sccp/sccp??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Ilya Geraskin
Level 1
Level 1

If somebody have faced with the same trouble try to add:

sccp ccm group 1

associate ccm 1 priority 1

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: