Cme Branches Connectivity with CUCM

[Muhammad Talha]

Can we connect multiple CME branches with CUCM our the WAN??If yes than how??

[Jitender Bhandari]

Hi,

You can have a SIP trunk configuration with CME over the WAN, See below

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html

(Rate if it helps)

JB

[Manish Gogna]

You can either add it via SIP trunk or add the CME as an H323 gateway on cucm. Since Jitender has shared the SIP trunk doc, you can check the following for H323

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/99792-h323cme.html

Manish