02-23-2012 06:03 PM - edited 03-19-2019 04:27 AM
Doese anybody know if there is a way or work around to use CallConnector Client in combination with 9971 IP Phones! Are there any development plannings or roadmap?
02-23-2012 06:59 PM
Hi Martin,
The appropriate place for getting roadmap related information would be one or more of following
1. Post your query at https://communities.cisco.com/community/partner/collaboration/uc?view=discussions
2. Avail the options ( post a query or open a developer tac case ) available here http://developer.cisco.com/web/cdc/tech/ucvoice
3. If nothing helps, reach out to Cisco CAM ( channel account management ) team locally in your country & have them confirm with Cisco Developers directly for you.
So far as you must have realized, SIP phones are not supported with Call Connector.
Hope it helps ?
GP.
Pls rate helpful posts !!
02-23-2012 07:36 PM
Hi Gajanan,
sorry this was not helpful for me!
Could you please give the eMail address of the responsible product manager for Unified Call Connector!
Thank you very much
Regards
Martin
Gesendet: Freitag, 24. Februar 2012 04:00
An: HOFER Martin
Betreff: - Re: CME Call Connector for SIP Based IP Phones
Home<>>
Re: CME Call Connector for SIP Based IP Phones
created by Gajanan Pande<> in Unified Communications Applications - View the full discussion<>>>
02-23-2012 07:47 PM
Martin,
I understand your concern but that is something we cant give publically. I suggest you reach out to CAM team & proceed further in that path.
GP.
02-23-2012 07:50 PM
Hi,
OK!
So - are there any future deployments or workarounds for this issue or not!
Thanks
Martin
Gesendet: Freitag, 24. Februar 2012 04:48
An: HOFER Martin
Betreff: - Re: CME Call Connector for SIP Based IP Phones
Home<>>
Re: CME Call Connector for SIP Based IP Phones
created by Gajanan Pande<> in Unified Communications Applications - View the full discussion<>>>
02-23-2012 07:55 PM
No workarounds as of yet, Martin.
Future deployments being part of roadmap would be answered by PM / Dev team.
GP.
02-23-2012 07:58 PM
Bad - but thats live!
Last question – how can I contact the PM / Dev team?
Thanks
Regards
Martin
Gesendet: Freitag, 24. Februar 2012 04:56
An: HOFER Martin
Betreff: - Re: CME Call Connector for SIP Based IP Phones
Home<>>
Re: CME Call Connector for SIP Based IP Phones
created by Gajanan Pande<> in Unified Communications Applications - View the full discussion<>>>
02-23-2012 08:02 PM
Use the CAM Locator tool here http://tools.cisco.com/WWChannels/CAMLOC/jsp/cam_locator.jsp to locate the CAM team nearest for you & ask them to cascade to PM ( Product Manager ) / Dev ( Developers or Business Unit ) team.
CAM will either cascade you or fetch the information for you from them.
GP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide