COR in CME/SRST

[Baseerat]

i need help to configure COR in CME/SRST my problem is ephone-dn register when SRST active but when SRST is not live then how can i restrict DNs

please advise,

[jballari]

Hi Firasat,

When SRST is not active, the diaplan restrictions are managed by the central solution installed, usually CUCM. It is there where you have to configure partitions and calling search spaces to allow users to dial or restrict certain numbers.

For configuration of COR in SRSTE/CME, please refer to the following link:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Cheers,

Jose

[Baseerat]

Hi Jose,

thanks for your response actually i donot understand that how can i put Corlist command in Ephone-dn because ephone-dn only show up when SRST active

Please advise,

[skilambi]

You can configure in CME mode. You will configure the router in CME as SRST mode. That will provide e-phone that will work during SRST mode and you can apply your cor-list.

Thanks

Srini

Sent from my iPhone