03-28-2023 06:00 PM - edited 03-28-2023 06:09 PM
Hello Everyone,
I want to send an SNMP Trap.
That's SIP Trunk Status
Also, I would like to get the result value return to SNMP Get.
Does anyone know the OID for SIP Trunk Status?
Or does CUCM send SNMP Trap message if SIP Trunk status is no service?
03-29-2023 02:57 AM - edited 03-29-2023 02:58 AM
The one and only document that I’m aware with any mention of CUBE and SNMP is Cisco Unified Border Element (CUBE) Management and Manageability Specification. It’s old, from at least the 12.4T days, so there could certainly be improvements since then; please share what you find.
Also, there should be a syslog/SNMP trap when a dial-peer transitions up/down.
03-30-2023 05:51 PM
First of all, I am sorry that my English is not good.
I kept looking for OID, But I couldn't find it.
So I thought of another way.
Send the syslog generated when an error occurs in CUCM to SNMP-Trap.
I Used MIB-Browser, and CISCO-SYSLOG-MIB loaded,
clogsNotificationEnabled set '1'
If you would like to refer to it, see CISCO-SYSLOG-MIB Trap Parameters in the link above.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide