11-13-2016 10:32 AM - edited 03-19-2019 11:49 AM
Hi All ,
we are using currently using CUCM ver 9.1.1.20000-5 , and we need to upgrade it to cucm 9.1.2 , because we have add cisco 8800 series ip phones in the system .
but i could not find upgrade file for above upgrade , can any one help me on it ?
Regards ,
11-13-2016 11:16 AM
Hi Aslam,
Refer this link:
https://software.cisco.com/download/release.html?mdfid=284510097&flowid=77894&softwareid=282074295&release=9.1%282%29SU5&relind=AVAILABLE&rellifecycle=&reltype=latest
Regards,
Hitesh
11-13-2016 11:29 AM
Thank you Hitesh ,
this link i already checked , its not giving information about upgrade from 9.1.1 to 9.1.2
Regards ,
11-13-2016 12:05 PM
The procedure is the same as in any other upgrade, just make sure to read the RN of the version you're going to.
01-27-2017 01:07 AM
Hi,
in this case, when I upgrade from 9.1.x to 9.1.2, is it mandatory to have the SWSS active?
When you have to migrate from 9.1 to 9.2 or to 10.x you should have SWSS, but an upgrade of the "maintenance number" still need SWSS?
thanks in advance
BR
01-27-2017 01:15 AM
Hi,
for minor upgrades , u do not need SWSS contract like 9.1.x to 9.1.2
But for major upgrades from 9 to 10 or 11 , u need to have SWSS contract , so that u can place order through PUT.
regds,
aman
11-13-2016 03:46 PM
If you are looking for upgrade guide and not the file, refer this link:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_2/CUCM_BK_C9FFFCD0_00_cucm-release-notes-912/CUCM_BK_C9FFFCD0_00_cucm-release-notes-912_chapter_01.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide