CUPS Upgrade 8.5.X to 8.6.X

[Leonardo Santana]

Hello i have an stupid doubt..

Im installing CUPS v8.5.X on Vmware a using the OVA template for CUPS 8.5, and i wanna to make the upgrade to version 8.6.X its possible since i using OVA Template for CUPS 8.5?

Thanks

Leonardo Santana

[Jaime Valencia]

Yes, just review the RNs for any additional considerations, depending on which version you're going to upgrade.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Leonardo Santana]

In this case what are have to look on the release notes?

I want to go from 8.5.x to 8.6.4

[Jaime Valencia]

There's a system upgrade section in the RNs you need to read.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Leonardo Santana]

Hello Java

I see on the release note of CUPS 8.6.4 this info:

VMware vSphere ESXi Version Support for Messaging and Presence Applications

Application	VMware vSphere ESXi 4.0	VMware vSphere ESXi 4.1	VMware vSphere ESXi 5.0
Cisco Unity Connection	8.0(2)+, 8.5(x), 8.6(x), 9.0(x)	8.0(2)+, 8.5(x), 8.6(x), 9.0(x)	8.0(2)+, 8.5(x), 8.6(x), 9.0(x)
Cisco Unity	7.x and later	7.x and later	7.x and later
Cisco Unified Presence	8.0(2)+	8.0(2)+	8.6(1)+

http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#VMware_vSphere_ESXi_Version_Support_for_Messaging_and_Presence_Applications

http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_6/english/rel_notes/cup8xrn.html#wp2970431

So CUPs Version 8.5.X is only supported at VMware vSphere ESXi 4.1, so i cannot install the CUPS 8.5.X correct?

Thanks

Leonardo Santana

[dsobrinho]

Hi my friend,

I hope you are fine

If you do not have the media 8.6.1 available, downloaded the OVA template CUPS 8.6.1 and configure on UCS. After that, following the steps below:

1 - download the upgrade to CUPS 8.6.1 and configure a SFTP server with this image available to be map.

2 - start a boot with media from CUPS 8.5 and map the path to SFTP to upgrade to version CUPS 8.6.1

3 - verify if the installation proccess.

Confirm if everything is okay.

Remmenber to configure the CUCM as well.

best regards,

Daniel Sobrinho