cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
275
Views
0
Helpful
3
Replies

Dedicate International Line for only International Calls.

aldhow777
Level 1
Level 1

There is dedicated International line which can be used for Local as well, i want to restrict this for only International calls.

3 Replies 3

Jitender Bhandari
Cisco Employee
Cisco Employee

Hi,

You will have to play with you CSS, make Sure the line CSS and Device CSS dont have access to Local Route pattern and only have access to International Route pattern within CUCM.

(Rate if it helps)

JB

Dennis Mink
VIP Alumni
VIP Alumni

Create a second line on the phone is you want. call it "international only".

give it a CSS that only contains the route patters that you use for international calls, so leave out local, std and internal.

that should work

Please rate if useful

Please remember to rate useful posts, by clicking on the stars below.

Shadi Shami
Level 7
Level 7

Hello,

First of all I'm assuming you mean by line, is an FXO/ E1/ T1.

It can be achieved, but the method depends on the gateway type:

1. If the Gateway is MGCP: you can either create a separate Route Group/ Route List and add the  line into that RG, then in the International Route Pattern, select the RL. Or if you do not want to create RG/ RL, you can choose the line directly under International Route Pattern directly.

2. If the Gateway SIP/ H323: assign a separate trunk-group to that line and under International Dial-peer route the calls to the created trunk-group as below:

voice-port 0/0/1
 trunk-group International

dial-peer voice 10 pots
 trunkgroup International
 description "International numbers"
 destination-pattern 900.T

P.S. In both ways make sure the line is not used by other Route Patterns/ Dial-peers to route the local calls.

Thank you,

Shadi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: