How do I configure DSP resources on a 3845 for voice termination

[webbcorey]

How do I configure DSP resources on a 3845 for voice termination?  I have a T1-PRI that is connected to it and need to ensure that the necessary voice termination DSP resources are allocated.

Thank you

[vraut]

You may want to use the DSP calculator

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

[Jaime Valencia]

You really do not configure anything, the endpoints allocate the DSP channels as necessary when you start configuring them.

You do need to make sure to provide enough DSPs to configure the endpoints you will use.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk