I am having some issues with informacast after a network migration. The branch sites that I am having trouble with are configured with dual uplinks to different routers. The core 1 and core 2 routers are configured with anycast rp.
The informacast behaivor is a bit odd. When attempting to page a small group of 3 phones, the test fails, but when you page the group with all phones in the building, the test works. And then after the all page, the original failed group of 3 phones will also continue to work for a duration of time. Can someone help with my multicast settings and let me know if there are any config issues?
ip pim rp-address 10.254.254.254 group-list 126.96.36.199/4 ip pim ssm range 188.8.131.52/8 ip pim anycast-rp 10.254.254.254 10.254.254.252 ip pim anycast-rp 10.254.254.254 10.254.254.253
Core1-IPN-1# sho ip mroute 184.108.40.206
show ip mroute 220.127.116.11 IP Multicast Routing Table for VRF "default"
ADMIN-MDF-4500X#sho ip pim ne PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable, L - DR Load-balancing Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 172.16.255.5 TenGigabitEthernet1/2 1d20h/00:01:28 v2 1 / G 172.16.255.1 TenGigabitEthernet1/1 2d18h/00:01:33 v2 5 / DR G