12-15-2014 05:53 AM - edited 03-19-2019 08:57 AM
Hi All,
Is it possible to integrate Lync 2010 with Cisco Call Manager in version 6 ??
Personally, I think version 6 is quite old so may be there are problems of integration with lync 2010...
Waiting for your replies.
Regards,
Mukendra JANGHU
12-17-2014 08:27 AM
Hi,
to do the integration between lync and Call manager you need VCS to do the integration
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-1.pdf
HTH
Anas
don't forget to rate the helpful posts
01-27-2015 09:18 AM
Will this work for Lync in the cloud?
01-27-2015 06:33 PM
I would like to provide call control from Lync using CUCM, but our Lync environment is hosted.
01-27-2015 05:43 PM
That depends Anas.
If you want to provide call control from Lync using a CUCM you do not need a VCS.
I have been doing that over a SIP trunk for the past 15 months or so.
If you want to bridge video then a VCS or other video infrastructure would come into play.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: