Showing results for 
Search instead for 
Did you mean: 

Is Unity4.2.1 demo version with 10 mailbox requiore license file

Level 1
Level 1


I have one doubt on license file for Unity4.2.1 demo version, Is it require license file ? or it will work by default after installing the server.

Pls its very urgent...

Waiting for the details..



2 Replies 2

Level 5
Level 5

Yes, it includes 10 mailbox licenses and 2 port licenses.

The license is in the demo file.


Rob Huffman
Hall of Fame
Hall of Fame

Hi Naga,

This "Default" License file is one of two that can be used on a Demonstration system. It has a few less features than the "Time Limited" License available from Cisco, but is immediatly available during the install so you are good to go;

Installing a Cisco Unity Demonstration System

A demonstration system is a fully functioning version of Cisco Unity that has the limits noted in the "Limits on a Cisco Unity Demonstration System" section. A demonstration system uses one of two different license files:

Default license file (available on the Cisco Unity server).

Time-limited license file (must be ordered from Cisco).

Enabling a Cisco Unity Demonstration System with the Default License File

The default license file (CiscoUnity40.lic) is automatically copied to the Cisco Unity server during installation.

To Enable a Demonstration System with the Default License File


Step 1 Install Cisco Unity as described in the Cisco Unity installation guide-up to the point where the Install the Cisco Unity License Files screen appears in the main window of the Cisco Unity Installation and Configuration Assistant.

Step 2 Click Run the Cisco Unity Install License File Wizard.

Step 3 On the Welcome screen of the wizard, click Next.

Step 4 Click Add.

Step 5 Browse to the CommServer\Licenses directory, and double-click CiscoUnity40.lic.

Step 6 Click Next.

Step 7 In the Licenses list, confirm that the license information is correct.

Step 8 Click Next.

Step 9 Click Finish.

Step 10 Continue following the instructions in the Cisco Unity installation guide to complete the installation.

From this good Unity 4.2 doc;

Hope this helps!