ISR 4321 AA Configuration

[Hamada Ahmed]

Dears,

could i configure auto attendant or IVR on ISR 4321 without need unity express ? 

[Georgios Fotiadis]

Yes you can. You should use: CME B-ACD and Tcl Call-Handling Applications

You can also see this: https://supportforums.cisco.com/t5/unified-communications/isr-4321-aa-configuration/m-p/3231368#M111682

[Hamada Ahmed]

Dears,

I want to to make the following , any incoming call on FXO will direct to Voice message with option 0 for help and 1 for sales , is it possiblw with ISR IOS only ?

[Georgios Fotiadis · Accepted solution]

Yes it is. Read the info in the post above.

[Mohamed Abdullah]

dear hamada,

i want to do the same yo was want 

(any incoming call on FXO will direct to Voice message with option 0 for help and 1 for sales , is it possiblw with ISR 4331 IOS only)

did you solve it ,can you help me 

[Roger Kallberg]

If you want to do the same or similar to the OP then you have the needed answer for this from @Georgios Fotiadis  already.