Long Distance Calls Drop Area Code

jwood1650 · ‎06-05-2013

I just setup my Voice Lab and for some reason when I try to dial a long distance number it seems like it drops the area code and pushed staight to the 7 digit number. Any idea on why this is?

I'm tryingn to call a Time & Temp number (913) 682 8463

Here is my config:

CallManager#show run

Building configuration...

Current configuration : 6539 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname CallManager

!

boot-start-marker

boot-end-marker

!

no logging buffered

!

no aaa new-model

clock timezone pst -8

no network-clock-participate slot 1

no network-clock-participate wic 0

ip cef

!

no ip dhcp use vrf connected

!

ip dhcp pool VOICE/DATA

network 10.0.50.0 255.255.255.0

option 150 ip 10.0.50.1

default-router 10.0.50.1

!

multilink bundle-name authenticated

!

trunk group OUT

!

voice service voip

dtmf-interworking rtp-nte

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

!

voice class h323 1

h225 timeout tcp establish 3

h225 timeout setup 3

!

voice class cause-code 1

no-circuit

!

voice translation-rule 1

rule 1 /^702586$1...$$/ /\1/

!

voice translation-profile DID

translate called 1

!

crypto pki trustpoint TP-self-signed-2215009052

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-2215009052

revocation-check none

rsakeypair TP-self-signed-2215009052

!

crypto pki certificate chain TP-self-signed-2215009052

certificate self-signed 01

30820243 308201AC A0030201 02020101 300D0609 2A864886 F70D0101 04050030

31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274

69666963 6174652D 32323135 30303930 3532301E 170D3133 30363037 30343133

34385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649

4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 32313530

30393035 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281

8100B100 E333437B 44D0EC60 8FADE1A0 89D3ADBC CDE13BD5 623B5205 75493AFB

C0D8BF0F 8D9129F1 5DE54189 C182498F 531FE400 AEA816C6 F6A7FCF0 447636BB

79B90C31 51B2879A 84489D5D 889DA761 835E8501 C9D86C3F 453214A2 A8EEA53C

C0244A31 703DA1F7 CA61AAAE A9BD3AED A1910AB4 98F24607 18208372 6E12F2B1

85450203 010001A3 6B306930 0F060355 1D130101 FF040530 030101FF 30160603

551D1104 0F300D82 0B43616C 6C4D616E 61676572 301F0603 551D2304 18301680

14490111 E89DCDAD EBB061C6 84597CC0 58E8CFCE 30301D06 03551D0E 04160414

490111E8 9DCDADEB B061C684 597CC058 E8CFCE30 300D0609 2A864886 F70D0101

04050003 8181000B 6829EF4F 26D5A8A8 BD03CFC2 810A2ED2 FDDBFAB3 097B4074

4A24959C 6564863D 9B7C6B67 E0C817D8 0CC796C2 945DA12B BA30D9A1 9EA6FB70

BB2E2653 D88D07A2 A530EE03 D9E72CB3 6B267C9A 0E130BF1 D6EAACC5 9EB375DF

2BF2AB25 F03C3FCA C5611B0B 94BACA6B 12238396 D885D4D8 492B75BD 4B40073F

27CF0FB5 D562B9

quit

!

username woodjl password 0 henry999 privilege 15

archive

log config

hidekeys

!

interface FastEthernet0/0

ip address 10.0.50.1 255.255.255.0

duplex auto

speed auto

!

interface Serial0/0

no ip address

encapsulation frame-relay

no fair-queue

!

interface Serial0/0.31 point-to-point

ip address 10.1.12.3 255.255.255.0

snmp trap link-status

frame-relay interface-dlci 301

!

interface FastEthernet0/1

ip address 20.0.24.2 255.255.255.0

duplex auto

speed auto

!

router ospf 1

log-adjacency-changes

network 20.0.24.0 0.0.0.255 area 4

!

ip forward-protocol nd

!

ip http server

ip http authentication local

ip http secure-server

ip http timeout-policy idle 600 life 86400 requests 10000

ip http path flash:gui

!

tftp-server flash:P00308000400.bin

tftp-server flash:P00308000400.loads

tftp-server flash:P00308000400.sb2

tftp-server flash:P00308000400.sbn

!

control-plane

!

voice-port 1/0/0

ring cadence pattern01

cptone GB

!

voice-port 1/0/1

!

voice-port 1/1/0

trunk-group OUT

no battery-reversal

cptone GB

connection plar opx 1001

description Office Line

!

voice-port 1/1/1

no battery-reversal

cptone GB

connection plar opx 1002

description Home Line

!

dial-peer voice 1001 pots

trunkgroup OUT

description Long Distance

forward-digits all

!

dial-peer voice 1002 pots

trunkgroup OUT

description Local Calls

destination-pattern .T

forward-digits 7

!

dial-peer voice 1003 pots

description International

destination-pattern 011T

port 1/1/1

!

dial-peer voice 1004 pots

incoming called-number .

direct-inward-dial

!

dial-peer voice 200 voip

destination-pattern 1...

session target ipv4:10.0.50.1

!

dial-peer voice 1 pots

preference 1

destination-pattern 91..........

port 1/1/1

forward-digits 11

!

dial-peer voice 4 pots

destination-pattern 9[2-9]......

port 1/1/1

forward-digits 7

!

dial-peer voice 3 pots

destination-pattern 9[2-9]......

port 1/1/1

forward-digits 7

!

dial-peer voice 4444 pots

translation-profile incoming DID

incoming called-number .

direct-inward-dial

!

dial-peer voice 2001 voip

destination-pattern 1001

codec g711ulaw

!

dial-peer voice 2002 voip

destination-pattern 1002

codec g711ulaw

!

gatekeeper

shutdown

!

telephony-service

load 7960-7940 P00308000400

max-ephones 24

max-dn 48

ip source-address 10.0.50.1 port 2000

timeouts interdigit 2

max-conferences 4 gain -6

web admin system name admin secret 5 $1$wMrx$WGyz/gL0UlSrWOhB6IBuz0

dn-webedit

time-webedit

transfer-system full-consult

directory entry 1 7027787551 name Home

directory entry 2 9137580443 name Steve & Teresa Wood Home

directory entry 3 9136831205 name Teresa Wood Cell

directory entry 4 9136833052 name Steve Wood Cell

create cnf-files version-stamp 7960 Mar 23 2013 00:14:46

!

ephone-dn 1

number 1001

label Lab

description Lab

name Lab

hold-alert 30 originator

!

ephone-dn 2

number 1002

label Office

description Office

name Office

hold-alert 30 originator

!

ephone 1

device-security-mode none

mac-address 0013.80DF.7F34

speed-dial 1 702XXXXXXX label "Jonathan Cell"

speed-dial 2 702XXXXXXX label "Katie Cell"

speed-dial 3 702XXXXXXX label "Ops Desk"

speed-dial 4 1001 label "Cisco Lab"

type 7960

button 1:1

!

ephone 2

device-security-mode none

mac-address 0011.20BA.F7B8

speed-dial 1 702XXXXXXX label "Jonathan Cell"

speed-dial 2 702XXXXXXX label "Katie Cell"

speed-dial 3 702XXXXXXX label "Ops Desk"

speed-dial 4 1002 label "Home Office"

type 7960

button 1:2

!

ephone-hunt 1 peer

!

line con 0

line aux 0

line vty 0 4

privilege level 15

login local

transport input telnet ssh

line vty 5 15

login

!

ntp server 64.250.229.100

!

end

yahsiel2004 · ‎06-05-2013

You might be matching your .T dial-peer which is configured to forward only 7. Your 91........... dial-peer is not matching since that's a total of 11 numbers and your dialing 10 numbers.

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-05-2013

Sorry still kinda new to this. What would be the fix, can you show me the config?

yahsiel2004 · ‎06-06-2013

If you're dialing 913-682-8463 without no access or long distance codes, then you should use the dial-peer below:

dial-peer voice 2 pots

destination-pattern 91........

port 1/1/1

forward-digits 10

If not, dial using 9-1--913-682-8463, which you would then match the dial-peer below:

dial-peer voice 1 pots

preference 1

destination-pattern 91..........

port 1/1/1

forward-digits 11

HTH

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-06-2013

Ok, so these are the dial-peers I have right now. I added the VOICE 2 POTS, but still no success.

Do I need to get rid of some of the dial-peers I have now to clear/clean up my config?

dial-peer voice 1001 pots

trunkgroup OUT

description Long Distance

forward-digits all

!

dial-peer voice 1002 pots

trunkgroup OUT

description Local Calls

destination-pattern .T

forward-digits 7

!

dial-peer voice 1003 pots

description International

destination-pattern 011T

port 1/1/1

!

dial-peer voice 1004 pots

incoming called-number .

direct-inward-dial

!

dial-peer voice 200 voip

destination-pattern 1...

session target ipv4:10.0.50.1

!

dial-peer voice 1 pots

preference 1

destination-pattern 91..........

port 1/1/1

forward-digits 11

!

dial-peer voice 4 pots

destination-pattern 9[2-9]......

port 1/1/1

forward-digits 7

!

dial-peer voice 3 pots

destination-pattern 9[2-9]......

port 1/1/1

forward-digits 7

!

dial-peer voice 4444 pots

translation-profile incoming DID

incoming called-number .

direct-inward-dial

!

dial-peer voice 2001 voip

destination-pattern 1001

codec g711ulaw

!

dial-peer voice 2002 voip

destination-pattern 1002

codec g711ulaw

yahsiel2004 · ‎06-06-2013

Can you post the output from a "debug voip dialpeer" with the example of the called number?

HTH

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-06-2013

Dialed 913-682-0001

.Jun 6 18:22:39.413: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=1001, Called Number=, Voice-Interface=0x8845BE90,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:39.413: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20001

.Jun 6 18:22:40.996: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:40.996: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9

.Jun 6 18:22:40.996: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:40.996: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:41.292: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=91, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:41.292: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=91

.Jun 6 18:22:41.292: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:41.292: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:41.621: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=913, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:41.625: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=913

.Jun 6 18:22:41.625: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:41.625: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:41.974: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9136, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:41.974: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136

.Jun 6 18:22:41.974: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:41.974: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:42.402: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=91368, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:42.402: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=91368

.Jun 6 18:22:42.402: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:42.402: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:42.731: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=913682, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:42.731: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=913682

.Jun 6 18:22:42.735: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:42.735: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:43.124: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9136820, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.124: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136820

.Jun 6 18:22:43.124: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:43.124: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:43.352: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=91368200, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.352: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=91368200

.Jun 6 18:22:43.352: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:43.352: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:43.512: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=913682000, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.512: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=913682000

.Jun 6 18:22:43.512: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

.Jun 6 18:22:43.512: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

.Jun 6 18:22:43.813: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9136820001, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.813: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136820001

.Jun 6 18:22:43.813: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

.Jun 6 18:22:43.813: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=2

.Jun 6 18:22:43.817: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Calling Number=9136820001, Called Number=9136820001, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.821: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136820001

.Jun 6 18:22:43.821: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

.Jun 6 18:22:43.821: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=2

2: Dial-peer Tag=1002

.Jun 6 18:22:43.821: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=9136820001, Called Number=, Voice-Interface=0x0,

Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.821: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=NO_MATCH(-1) After All Match Rules Attempt

.Jun 6 18:22:43.825: //-1/E78B69058043/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9136820001, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:43.829: //-1/E78B69058043/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136820001

.Jun 6 18:22:43.829: //-1/E78B69058043/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

.Jun 6 18:22:43.829: //-1/E78B69058043/DPM/dpMatchPeersMoreArg:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=2

2: Dial-peer Tag=1002

.Jun 6 18:22:47.883: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Calling Number=, Called Number=1001, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:47.883: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=1001

.Jun 6 18:22:47.883: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

.Jun 6 18:22:47.883: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=20001

2: Dial-peer Tag=200

3: Dial-peer Tag=1002

.Jun 6 18:22:47.887: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9136820001, Peer Info Type=DIALPEER_INFO_SPEECH

.Jun 6 18:22:47.887: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9136820001

.Jun 6 18:22:47.887: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

.Jun 6 18:22:47.887: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=2

2: Dial-peer Tag=1002

yahsiel2004 · ‎06-06-2013

Are you receivng a call intercept from your carrier? If this is a long distance call leaving the router, out a POTs line and the carrier is expecting to see 1-913-682-0001, you will need to change dial-peer 2.

Configuration examples below:

With an access code of "9"

dial-peer voice 2 pots

destination-pattern 91..........

port 1/1/1

forward-digits 11

Without an access code of "9"

dial-peer voice 2 pots

destination-pattern 191........

port 1/1/1

forward-digits 11

HTH

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-06-2013

Awesome that works....one last question. Caller-ID doesn't show up on external numbers, how can have the phone show who is calling?

yahsiel2004 · ‎06-06-2013

If you want to receive CID, you have configure your FXO ports with "caller-id enable" as seen below:

voice-port 1/1/0

trunk-group OUT

no battery-reversal

cptone GB

connection plar opx 1001

description Office Line

caller-id enable

voice-port 1/1/1

no battery-reversal

cptone GB

connection plar opx 1002

description Home Line

caller-id enable

Please rate all useful replies.

HTH

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-06-2013

Is there a software limitaion for that because I get this:

CallManager(config-voiceport)#caller-id enable

^

% Invalid input detected at '^' marker.

Version 4.1(0)

Cisco Unified Communications Manager Express

Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9_IVS-M), Version 12.4(15)T14

jwood1650 · ‎06-06-2013

I have 2 FXO ports and 2 FXS ports....

My PTSN line is in 1/1/0 which is my FXO card. If that helps

yahsiel2004 · ‎06-07-2013

So you are unable to apply the "caller-id enable" command on your FXO ports?

caller-id enable

To allow the sending or receiving of caller-ID information, use the caller-id enable command in voice-port configuration mode at the sending foreign exchange station (FXS) voice port or the receiving foreign exchange office (FXO) voice port. To disable the sending and receiving of caller-ID information, use the no form of this command.

caller-id enable [type {1 | 2}]

no caller-id enable [type {1 | 2}]

Syntax Description


type	(Optional) Indicates that the following keyword is a caller-ID type. •1—Type I only. Type I transmits the signal when the receiving phone is on hook. •2—Type II only. Type II transmits the signal when the receiving phone is off hook, for instance to display the caller ID of an incoming call when the receiving phone is busy (call-waiting caller ID).

Command Default

The sending and receiving of caller-ID information is disabled.

Command Modes

Voice-port configuration

Command History


Release	Modification
12.1(2)XH	This command was introduced on the Cisco 2600 series, Cisco 3600 series, and Cisco MC3810.
12.1(3)T	This command was integrated into Cisco IOS Release 12.1(3)T.
12.3(7)T	The type 1 and type 2 keywords were introduced.

Please rate all useful replies.

HTH

Regards,

Yosh

HTH Regards, Yosh

jwood1650 · ‎06-07-2013

Correct I can not apply the command on the FXO ports.

Sent from Cisco Technical Support iPhone App

yahsiel2004 · ‎06-07-2013

Try going under the FXO port and typing "caller-id" followed by a ?

HTH

Regards,

Yosh

HTH Regards, Yosh