This is the first time I'm attempting to set up a conference bridge.
I followed the "Conference Bridge Configuration Checklist" on my CCM 3.5:
1. Configured a Hardware Conference Device and a Software Conference Device.
2. Configured the Meet-Me Number/Pattern.
When I press "more", then "MeetMe", I hear two tones then a steady dial tone returns. I then dial 2120 and then a busy tone is returned.
I think the first thing I should do is verify that I have "hardware". I looked in the Windows 2000 Device Manager but did not see any dsp or T1 hardware devices. Should I be looking elsewhere?
What else should I be checking?