Migrate voice gateway from ISR 3900 to ISR 8200

[Baba72]

Hello all,

We migrate our voice gateway from ISR 3900 series to ISR 8200.

When we enable the debug command, we noticed that there is no output.

We would like to know if there are special debug command for voice gateway on ISR 8200?

And also if there is a best pratique to configure ISR 8200 for voice gatetway .

Thanks for all 

[Nithin Eluvathingal]

You might be seeing the debug output on “show logging.”

Enable terminal monitor if you are not accessing through the console.

[Roger Kallberg]

Apart from what @Nithin Eluvathingal wrote you should also check so that you do not have no logging monitor set in your configuration. With that you won't get anything even if you turn on terminal monitor.